Skip to search formSkip to main contentSkip to account menu

Frequency capping

Known as: Capping 
Frequency capping is a term in advertising that means restricting (capping) the number of times (frequency) a specific visitor to a website is shown… 
Wikipedia (opens in a new tab)

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
Highly Cited
2010
Highly Cited
2010
In modern Cu interconnections in microelectronics, weak adhesion between the chemical-mechanical polished copper surface and the… 
Highly Cited
2002
Highly Cited
2002
Gold-titania (Au-TiO2) composite aerogels were synthesized, characterized, and tested as ambient-temperature oxidation catalysts… 
Highly Cited
2002
Highly Cited
2002
Femtosecond transient absorption spectroscopy has been used together with time-integrated photoluminescence (PL) measurements to… 
Highly Cited
2000
Highly Cited
2000
  • B. LeeR. Choi J. Lee
  • 2000
  • Corpus ID: 56269695
MOSFET's with equivalent oxide thickness of 8-12 /spl Aring/ have been demonstrated by using high-K gate dielectric thin films… 
Highly Cited
1999
Highly Cited
1999
ABSTRACTWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW Poly(ethylene glycol-b-lactide) possessing a methoxygroup at the poly(ethylene glycol) (PEG) chain end anda polymerizable methacryloyl group at the poly(lacticacid) (PLA) chain end (MeO–PEG/PLA–methacryloyl)was prepared by an anionic ring-opening polymerizationof ethylene oxide and DL -lactide in tandem mannerinitiatedwithapotassium2-methoxyethanolate,followedby end-capping with an excess of methacrylic anhydride.The molecular weight of the obtained polymer wascontrolled by the initial monomer/initiator ratio, whichwas confirmed by the combination of gel permeationchromatography and nuclear magnetic resonance ana-lyses. The functionality of the methacryloyl–PLA endwas almost quantitative. The MeO–PEG/PLA–metha-cryloyl (38/35; these numbers in parentheses denote themolecular weights of PEG and PLA segments divided by100, respectively) formed a core–shell type sphericalmicelle in aqueous media obtained by a dialysistechnique, the cumulant diameter of which was ca.30nm with very low polydispersity factor.The methacryloyl group adjacent to the PLA waspolymerized in the PLA core of the micelle. Thepolymerizationproceededthermallywithradicalinitiatorand photochemically with photo-initiator to producecore-polymerized nanoparticles, which was found byspectroscopic and light-scattering techniques. Taxol-incorporated micelles were prepared to entrap Taxol intoMeO–PEG/PLA–methyacryloyl block copolymer mi-celles by the oil/water emulsion method. Copyright O1999 John Wiley & Sons, Ltd.KEYWORDS: polymeric micelle; stable nanoparticle;drugdeliverysystem;PEG/PLAblockcopolymer;micellestability; taxol 
Highly Cited
1997
Highly Cited
1997
Clastic sedimentary deposits and associated volcanic rocks record the progress of Tertiary extension in the Mexican state of… 
Highly Cited
1995
Highly Cited
1995
The preparation and screening of combinatorial libraries has in recent years become an attractive method for the discovery of… 
Highly Cited
1985
Highly Cited
1985
This paper describes analytical models for the calculation of the current-voltage characteristics of ion-implanted GaAs FET's… 
Highly Cited
1974
Highly Cited
1974
THE phenomenon of capping in lymphocytes1–4 consists of the segregation of membrane components, specifically cross-linked by…