Skip to search formSkip to main content
You are currently offline. Some features of the site may not work correctly.

Low-temperature polycrystalline silicon

Known as: LTPS 
Low-temperature polycrystalline silicon (LTPS) is polycrystalline silicon that has been synthesized at relatively low temperatures (~650 °C and lower… Expand
Wikipedia

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
Review
2011
Review
2011
Abstract We review the technical progress made in the past several years in the area of mono- and polycrystalline thin-film… Expand
  • figure 1
  • table 1
  • figure 2
  • table 3
  • figure 3
Review
2010
Review
2010
Abstract In this paper we provide a review and overview of a series of works generated in our laboratory over the last 5 years… Expand
  • figure 2
  • figure 3
  • figure 4
  • figure 5
  • figure 6
2007
2007
In this paper, we have successfully fabricated poly-Si-oxide-nitride-oxide-silicon (SONOS)-type poly-Si-thin-film transistor (TFT… Expand
  • figure 3
  • figure 1
  • table I
  • figure 2
  • figure 4
Highly Cited
2006
Highly Cited
2006
The authors have proved that negative bias temperature instability (NBTI) is an important reliability issue in low-temperature… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 6
Highly Cited
2006
Highly Cited
2006
Abstract A study of the photodegradation of different pharmaceuticals [furosemide, ranitidine (hydrochloride), ofloxacine… Expand
  • figure 1
  • table 1
  • figure 2
  • table 2
  • table 3
2006
2006
In order to substantially reduce the costs of present crystalline Si solar cells, the material consumption of highly pure Si in a… Expand
  • figure 1.1
  • figure 1.2
  • figure 1.3
  • figure 1.4
  • figure 1.5
2004
2004
We have developed a low-temperature polycrystalline silicon thin film transistor (LTPS-TFT) fingerprint sensor (FPS) based on a… Expand
  • figure 1
  • figure 2
  • table 1
  • figure 3
  • figure 4
Highly Cited
2001
Highly Cited
2001
Microstructure-level residual stresses arise in polycrystalline ceramics during processing as a result of thermal expansion… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Highly Cited
1999
Highly Cited
1999
MFI polycrystalline "lms were prepared on non-porous glass as well as on porous alumina substrates, using secondary growth of… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Highly Cited
1999
Highly Cited
1999
The authors present here experimental results on the nano-indentation of polycrystalline Cu thin films, of three different… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4