FAQ

Technology Development and Commercialization Branch

Known as: TDCB 
Oversees and coordinates technology transfer and partnering with the federal government to develop leading-edge technologies into products that… (More)
National Institutes of Health

Topic mentions per year

Topic mentions per year

2004-2016
02420042016

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2017
2017
Targeted Self-Healing by Magnetically Guiding Microcapsules.
Magnetically guided microcapsules are used to achieve self-healing with 1/10th of the healing components required using… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2014
2014
A High-Resolution TDC-Based Board for a Fully Digital Trigger and Data Acquisition System in the NA62 Experiment at CERN
A time-to-digital converter-based system, to be used for most subdetectors in the high-flux rare-decay experiment NA62 at CERN… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2011
2011
Self-healing thermoset using encapsulated epoxy-amine healing chemistry
Self-healing was achieved with a dual-microcapsule epoxy-amine chemistry in thermoset epoxy. One capsule contained a modified… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2010
2010
Self-healing of a high temperature cured epoxy using poly(dimethylsiloxane) chemistry
A high temperature cured self-healing epoxy is demonstrated by incorporating microcapsules of poly (dimethylsiloxane) (PDMS… (More)
  • figure 2
  • figure 1
  • figure 3
  • table 1
  • figure 4
Is this relevant?
2009
2009
Hydrophobic self assembly molecular layer for reliable Cu-epoxy interface
This paper discusses the use of a hydrophobic thiol based compound as adhesion promoter for copper (Cu)-epoxy interface. The… (More)
  • figure 2
  • figure 3
  • figure 4
  • table 1
  • figure 7
Is this relevant?
2009
2009
A multiscale method to predict delamination in Cu-epoxy systems in electronic packages
The interface of epoxy molding compound (EMC) and Cu is known to be one of the weakest points in the electronic package design… (More)
  • figure 1
  • figure 3
  • figure 4
  • figure 5
  • figure 6
Is this relevant?
2008
2008
A multi-scale interfacial delamination model of Cu-SAM-epoxy systems
Interfacial delamination, due to the presence of dissimilar material systems, is one of the primary concerns in electronic… (More)
  • figure 2
  • figure 1
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2006
2006
Fatigue crack propagation in microcapsule - toughened epoxy
The addition of liquid-filled urea-formaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue… (More)
  • table 1
  • table 2
  • figure 1
  • figure 2
  • figure 3
Is this relevant?
2005
2005
Isolation of a bacterium that degrades urethane compounds and characterization of its urethane hydrolase
A bacterium which degrades urethane compounds was isolated and identified as Rhodococcus equi strain TB-60. Strain TB-60 degraded… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • table 2
Is this relevant?
2004
2004
Microcapsule induced toughening in a self-healing polymer composite
Microencapsulated dicyclopentadiene (DCPD) healing agent and Grubbs’ Ru catalyst are incorporated into an epoxy matrix to produce… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?