PI-60E polyimide resin

 
National Institutes of Health

Topic mentions per year

Topic mentions per year

1979-2017
02419792017

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2017
2017
Although theoretical investigation has demonstrated that fewer strain transfer layers imply a greater strain transfer ratio, as… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2015
2015
We report a facile method to fabricate free-standing polyimide (PI) nanotips on substrates by using plasma treatment with oxygen… (More)
Is this relevant?
2009
2009
Adhesion between zeolites and polymers is a central factor in achieving defect-free mixed-matrix membranes for energy-efficient… (More)
  • figure 1
  • figure 3
  • figure 2
  • table 1
  • table 2
Is this relevant?
Review
2008
Review
2008
New routes for the synthesis of high Tg thermally stable polymer foams with pore sizes in the nanometre regime have been… (More)
  • table 1
  • figure 1
  • figure 2
  • table 2
  • table 3
Is this relevant?
2005
2005
This paper explores the electrochemical patterning of thin metal films using a scanning probe tip as an electrode. In particular… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2005
2005
This paper explores the electrochemical patterning of thin metal films using a scanning probe tip as an electrode. In particular… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 5
  • figure 4
Is this relevant?
2003
2003
In recent years, there has been tremendous interest in all-printed electronics as a means of achieving ultra-low-cost electronic… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
Highly Cited
2001
Highly Cited
2001
The measured and calculated propagation constant of coplanar waveguide (CPW) on low-resistivity silicon (1 cm) with a… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
Highly Cited
2000
Highly Cited
2000
Low-loss microwave microelectromechanical systems (MEMS) shunt switches are reported that utilize highly compliant serpentine… (More)
  • figure 1
  • table I
  • figure 2
  • figure 4
  • table II
Is this relevant?
1999
1999
A repetitively pulsed copper vapor laser (510 and 578 nm) is used to machine an opaque polymer (polyimide-Vespel) and a… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
Is this relevant?