Inductive output tube

Known as: Klystrode 
The inductive output tube (IOT) or klystrode is a variety of high frequency transmitting linear-beam vacuum tube, similar to a klystron, which… (More)
Wikipedia

Topic mentions per year

Topic mentions per year

1984-2016
024619842016

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2011
2011
L-3 Communications, Electron Devices Division (EDD) has developed an inductive output tube (IOT) with large instantaneous… (More)
  • figure 2
  • figure 3
  • figure 1
Is this relevant?
2011
2011
This paper describes a 402.5 MHz 140 kW Inductive Output Tube (IOT) that is being developed for use in proton accelerators. New… (More)
  • figure 2
  • figure 1
  • figure 3
  • figure 4
Is this relevant?
2011
2011
Calabazas Creek Research, Inc. (CCR) and Communications & Power Industries, LLC (CPI) are assembling a 350 MHz, 200 kW CW… (More)
Is this relevant?
2010
2010
L-3 Communications, Electron Devices Division (EDD) has developed an inductive output tube (IOT) with large instantaneous… (More)
  • figure 2
  • figure 1
Is this relevant?
2010
2010
This paper describes the latest advances in code development targeted to model the beam wave interaction of inductive output… (More)
  • figure 1
  • figure 2
Is this relevant?
2009
2009
L-3 Electron Devices Division (EDD) is developing a wideband IOT (WBIOT) with a 1 dB bandwidth greater than ten percent. High… (More)
  • figure 1
  • figure 2
Is this relevant?
2009
2009
  • R G Carter
  • IEEE Transactions on Electron Devices
  • 2009
A simple method for modeling the performance of an inductive output tube (IOT) is described. The model reproduces the… (More)
  • figure 1
  • figure 2
  • figure 3
Is this relevant?
2009
2009
We describe the simulation of an inductive output tube (IOT) using the particle-in-cell code MAGIC. Simulations were performed to… (More)
  • figure 1
  • figure 2
  • figure 4
  • figure 3
Is this relevant?
2008
2008
Inductive output tubes (IOTs) employ emission gating to modulate the electron beam directly at the cathode surface. The high… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
Is this relevant?
2005
2005
There is an increasing requirement within the particle accelerator community for CW RF power sources in the L-band frequency… (More)
  • figure 1
  • figure 2
  • figure 3
  • table 1
Is this relevant?