IEEE 754-1985

Known as: IEC 559, ANSI/IEEE Std 754, DIN IEC 60559:1992-01 
IEEE 754-1985 was an industry standard for representing floating-point numbers in computers, officially adopted in 1985 and superseded in 2008 by the… (More)
Wikipedia

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2010
2010
This paper investigates the power integrity behavior of planar electromagnetic bandgap (EBG) structures embedded between two… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 6
  • figure 4
Is this relevant?
2007
2007
Scientific applications rely heavily on floating-point arithmetic and, therefore, are affected by the precision and… (More)
  • table 1
  • table 2
Is this relevant?
2007
2007
Decimal floating-point multiplication is important in many commercial applications including banking, tax calculation, currency… (More)
  • figure 1
  • figure 2
  • table 1
  • table 2
  • table 3
Is this relevant?
2005
2005
IEEE Standard 519-1992 is a mature document at this time and contains widely-adopted recommendations for harmonic control in… (More)
  • table 1
  • table 2
  • table 3
  • table 4
  • table 5
Is this relevant?
Highly Cited
2005
Highly Cited
2005
Multiple-input multiple-output (MIMO) wireless systems use antenna arrays at both the transmitter and receiver to provide… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
Is this relevant?
Highly Cited
2004
Highly Cited
2004
This paper presents an approximate analytical solution to the optimal consumption and portfolio choice problem of an inŽnitely… (More)
  • table I
  • table II
  • table III
  • table IV
  • table V
Is this relevant?
Highly Cited
2002
Highly Cited
2002
Current algorithms for minimum-energy routing in wireless networks typically select minimum-cost multi-hop paths. In scenarios… (More)
Is this relevant?
Highly Cited
2001
Highly Cited
2001
Status of this Memo This document specifies an Internet standards track protocol for the Internet community, and requests… (More)
Is this relevant?
Highly Cited
1998
Highly Cited
1998
The main objective of core-based IC design is improvement of design efficiency and time-to-market. In order to prevent test… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
1992
1992
An important factor in the optimization of a multi-level circuit, modeled as a Boolean network, is to compute the flexibility for… (More)
  • figure 2.1
  • figure 2.2
  • figure 3.1
  • figure 3.2
  • figure 3.3
Is this relevant?