Skip to search formSkip to main content
You are currently offline. Some features of the site may not work correctly.

AZ31 alloy

 
National Institutes of Health

Related topics

Related topics

1 relation

Broader (1)

Mg-Al-Zn-Mn-Si-Cu alloy

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2018
2018
Comparison of Corrosion Resistance and Cytocompatibility of MgO and ZrO2 Coatings on AZ31 Magnesium Alloy Formed via Plasma Electrolytic Oxidation
In this work, one coating is comprised of ZrO2 and the other consists of MgO as main phase composition was produced on AZ31… Expand
  • table 1
  • figure 1
  • figure 2
  • figure 3
  • figure 4
Is this relevant?
2018
2018
Enhanced corrosion resistance and cytocompatibility of biomimetic hyaluronic acid functionalised silane coating on AZ31 Mg alloy for orthopaedic applications
AbstractThis paper reports the corrosion resistant and cytocompatible properties of the hyaluronic acid-silane coating on AZ31 Mg… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • table 1
Is this relevant?
2016
2016
In vitro and in vivo studies of biodegradable fine grained AZ31 magnesium alloy produced by equal channel angular pressing.
The objective of the present work is to investigate the role of different grain sizes produced by equal channel angular pressing… Expand
Is this relevant?
2016
2016
Enhanced mechanical behavior and reduced mechanical anisotropy of AZ31 Mg alloy sheet processed by ECAP
Abstract AZ31 Mg alloy sheets were processed by equal channel angular pressing (ECAP) at 225 °C with a channel angle of 110… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • table 1
Is this relevant?
Highly Cited
2015
Highly Cited
2015
In vitro and in vivo biocompatibility and corrosion behaviour of a bioabsorbable magnesium alloy coated with octacalcium phosphate and hydroxyapatite.
Octacalcium phosphate (OCP) and hydroxyapatite (HAp) coatings were formed on Mg-3 mass% Al-1 mass% Zn (AZ31) magnesium alloy by a… Expand
Is this relevant?
2015
2015
Analysis of metallic traces from the biodegradation of endomedullary AZ31 alloy temporary implants in rat organs after long implantation times.
AZ31 alloy has been tested as a biodegradable material in the form of endomedullary implants in female Wistar rat femurs. In… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • table 2
Is this relevant?
2013
2013
ULTRAFINE GRAIN EVOLUTION IN Mg ALLOYS, AZ31, AZ61, AZ91 BY MULTI DIRECTIONAL FORGING
were employed. In all the alloys, the average grain size decreased rapidly with cumulative strain during MDF. Twinning and… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2012
2012
The Effect of AZ31 Alloy Flow Stress Description on the Accuracy of Forward Extrusion FE Simulation Results
Hot compression tests of the AZ31 magnesium alloy, performed for wide ranges of temperature and strain rate, revealed two… Expand
  • figure 1
  • table 1
  • figure 2
  • figure 3
  • figure 5
Is this relevant?
2010
2010
Evaluation of material properties and design requirements for biodegradable magnesium stents
Magnesium represents a very attractive material for biodegradable stents since the process of its natural and gradual dissolution… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • table 2
Is this relevant?
2007
2007
Extrusion Limits of Magnesium Alloys
Magnesium alloys are generally found to be slower to extrude than aluminum alloys; however, limited quantitative comparisons of… Expand
  • table I
  • figure 1
  • figure 2
  • figure 3
  • figure 4
Is this relevant?
By clicking accept or continuing to use the site, you agree to the terms outlined in our Privacy Policy, Terms of Service, and Dataset License
ACCEPT & CONTINUE