Skip to search formSkip to main content

Mg-Al-Zn-Mn-Si-Cu alloy

Known as: Mg-Al-Zn alloy 
 
National Institutes of Health

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2016
2016
Mn was an important alloying element used in Al-Mg-Mn alloys. However, it had to be limited to a low level (<1.0 wt %) to avoid… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • table 2
Is this relevant?
2016
2016
A hexagonal nanosheet LDH@ZIF-8 composite was fabricated by in situ growth of ZIF-8 on Zn-Al LDH without adding any zinc… Expand
Is this relevant?
2015
2015
Shape memory property characterizes the behavior of many Ti based and Cu based alloys (SMAs). In Cu-Zn-Al SMAs, the original… Expand
  • figure 1
  • table 1
  • figure 2
  • figure 3
  • figure 4
Is this relevant?
2015
2015
Layered double hydroxides (LDHs) are an ultravioletlight (UV)-resistant material. In this study, two types of LDHs (Mg-Al-LDHs… Expand
  • figure 1
  • figure 2
  • table 1
  • figure 3
  • figure 4
Is this relevant?
2010
2010
The construction of larger and faster ships has brought about many problems such as cavitations and erosion corrosion… Expand
Is this relevant?
2008
2008
A new electrodeposition condition to produce Zn-Al LDH films was developed using nitrate solutions containing Zn (2+) and Al (3… Expand
Is this relevant?
2005
2005
We report results from an extensive study on the speciation of zinc (Zn) and its relation to the mobility and bioavailablity of… Expand
  • table 1
  • figure 1
  • figure 2
  • table 2
  • figure 3
Is this relevant?
2005
2005
Corrosion tests of 316L and two intermetallic compounds Fe3Al and FeCrSi in industrial Galvanizing (Zn-0.18Al), GALFAN (Zn-5Al… Expand
  • figure 1
  • table I
Is this relevant?
1999
1999
The electrochemical behaviour of Al–x%Zn alloys (1 wt% ≤ x ≤ 80 wt% ) was studied in 0.5 m sodium chloride solution. The… Expand
  • table 1
  • table 2
Is this relevant?
1979
1979
주조용 Zn-Al-2% Cu 합금의 실험 결과로 얻어진 기계적 성질과 dendrite 형태에 미치는 영향은 다음과 같다. 1. Al 함량이 16%에서 19%, 22%로 증가함에 따라 인장강도는 33㎏/㎟, 31㎏/㎟, 29… Expand
Is this relevant?