Salt spray test

Known as: ASTM B117, B117, ISO 9227 
The salt spray (or salt fog) test is a standardized and popular corrosion test method, used to check corrosion resistance of materials and surface… (More)
Wikipedia

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2017
2017
Two customized hot-dip galvanized test specimens were applied onto the steel substrates, then the specimens were tested 5000h… (More)
  • figure 1
  • figure 2
Is this relevant?
2014
2014
Most of the commonly used lead-free solders have a high melting temperature. However, in many applications a lower processing… (More)
  • figure 1
  • figure 3
  • figure 2
  • figure 4
  • figure 5
Is this relevant?
2014
2014
a Department of Mechanical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia b Department of… (More)
  • figure 1
  • figure 2
  • table 1
  • figure 3
  • figure 4
Is this relevant?
2014
2014
Water absorption is a major concern for natural fibers as reinforcement in wood plastic composites (WPCs). This paper presents a… (More)
  • table 1
  • figure 1
  • figure 3
  • figure 2
  • table 2
Is this relevant?
2012
2012
The corrosion resistance and adhesiveness of a hydroxyapatite (HAp)-coated AZ31 magnesium alloy rolled plate were evaluated by a… (More)
  • table 1
  • figure 1
  • figure 2
  • figure 3
  • table 2
Is this relevant?
2009
2009
In this study a salt spray test was used to compare the reliability of electrical connectors from two different manufacturers… (More)
  • figure 1
  • figure 3
  • figure 2
  • table 1
  • figure 4
Is this relevant?
2009
2009
  • 2009
A technical guide to the salt spray test and its interpretation with stainless steel 2 
  • figure 1
  • figure 1
  • figure 2
  • figure 3
Is this relevant?
2009
2009
The purpose of this paper is to evaluate the feasibility of using recycled canola oil as raw material to produce ASTM standard… (More)
  • table 1
  • table 2
  • table 3
Is this relevant?
2004
2004
The Cell Method (CM) code with automatic remeshing for crack propagation analysis [Ferretti (2003)] is here used for modeling the… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2000
2000
  • Zdenek P. Bazant, Goangseup Zi, Christian Meyer
  • 2000
Using waste glass as an aggregate in concrete can cause severe damage because of the alkalisilica reaction (ASR) between the… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?