Skip to search formSkip to main content
You are currently offline. Some features of the site may not work correctly.

Multipass plasma transmembrane protein

Known as: Multipass transmembrane protein 
National Institutes of Health

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2019
2019
Comparative study of activated flux-GTAW and multipass-GTAW dissimilar P92 steel-304H ASS joints
ABSTRACT In the present study, welding of P92 steel and 304H austenitic stainless steel (304H ASS) plates (thickness: 8 mm) was… Expand
2013
2013
Using patient‐specific phantoms to evaluate deformable image registration algorithms for adaptive radiation therapy
The quality of adaptive treatment planning depends on the accuracy of its underlying deformable image registration (DIR). The… Expand
  • figure 1
  • figure 2
  • figure 3
  • table 1
  • table 2
2011
2011
Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds
Abstract Residual stresses that arise as a result of welding can cause distortion, and also have significant implications for… Expand
2011
2011
Extrudate swell of linear and branched polyethylenes: ALE simulations and comparison with experiment
Abstract Extrudate swell is a common phenomenon observed in the polymer extrusion industry. Accurate prediction of the dimensions… Expand
  • table 1
  • figure 1
  • figure 2
  • table 2
  • figure 3
2010
2010
Interplay of processing, morphological order, and charge-carrier mobility in polythiophene thin films deposited by different methods: comparison of spin-cast, drop-cast, and inkjet-printed films.
The dependence of morphology and polymer-chain orientation of regioregular poly(3-hexylthiophene) (rrP3HT) thin films on… Expand
Highly Cited
2008
Highly Cited
2008
Filament stretching rheometry and break-up behaviour of low viscosity polymer solutions and inkjet fluids
This paper reports experimental observations on the way certain low viscosity Newtonian, polymer and inkjet fluids respond to… Expand
  • table 1
  • figure 6
  • figure 1
  • figure 2
  • figure 4
2008
2008
Observation and Mitigation of Multipass BBU in CEBAF
Abstract The Continuous Electron Beam Accelerator Facility (CEBAF) recirculating accelerator at Jefferson Lab consists of two… Expand
  • figure 1
  • figure 3
  • figure 2
Review
2007
Review
2007
Review of Multipass Slab Laser Systems
The multipass slab (MPS) solid-state laser design is a diode-laser, side-pumped configuration that combines high efficiency with… Expand
  • figure 1
  • table I
  • figure 2
  • figure 5
  • figure 3
2006
2006
Matching time dependent pressure driven flows with a Rolie Poly numerical simulation
This paper is concerned with pressure driven flow behaviour of molten viscoelastic polymers and reports experimental data and… Expand
  • table 1
  • figure 4
2000
2000
Direct experimental evidence for flow induced fibrous polymer crystallisation occurring at a solid/melt interface
We report experimental observations on the way that flowing polyethylene melts can crystallise within a processing channel… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
By clicking accept or continuing to use the site, you agree to the terms outlined in our Privacy Policy, Terms of Service, and Dataset License
ACCEPT & CONTINUE