Skip to search formSkip to main contentSkip to account menu

Ivoclar Universal Cement

Known as: Ivoclar Universal Zement, Ivoclar-Vivadent Universal Cement 
National Institutes of Health

Related topics

Related topics

2 relations
Composite Resins

Broader (1)

Resin Cements

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2015
2015
Experimental analysis of 5G candidate waveforms and their coexistence with 4G systems
—The 5G mobile standard will very likely include a new waveform that addresses scenarios like sporadic low-latency traffic and… 
2015
2015
Erfahrungen mit PMMA-Zement als intervertebraler Stand-alone-Platzhalter
ZusammenfassungHintergrundDie operative Behandlung ei­ner symptomatischen degenerativen lumbalen Bandscheibenerkrankung bei… 
2014
2014
Fiber-reinforced composite fixed dental prostheses with various pontics.
PURPOSE To evaluate the load-bearing capacities of fiber-reinforced composite (FRC) fixed dental prostheses (FDP) with pontics of… 
2014
2014
Effect of exposure time on the polymerization of resin cement through ceramic.
PURPOSE This study measured the effects of using three different exposure times to cure one resin cement through two types of… 
2011
2011
Curing efficiency of various resin-based materials polymerized through different ceramic thicknesses and curing time
PURPOSE The aim of this in vitro study was to examine the curing efficiency of various resin-based materials polymerized through… 
2009
2009
Effect of light-curing units, post-cured time and shade of resin cement on knoop hardness.
The aim of this study was to evaluate the Knoop hardness after 15 min and 24 h of different shades of a dual-cured resin-based… 
2008
2008
In vitro study of mean loads and modes of failure of all-ceramic crowns cemented with light-cured or dual-cured luting cement, after 1 and 30 d of storage.
This study compared the mean loads and modes of failure of teeth restored with all-ceramic crowns (ACCs) cemented with dual-cured… 
2007
2007
Marginal Integrity of CAD/CAM Fixed Partial Dentures
Objectives Computer-aided design (CAD) and manufacturing (CAM) allows the milling of high strength zirconia fixed partial… 
2007
2007
Influence of curing rate of resin composite on the bond strength to dentin.
This study determined whether the strength with which resin composite bonds to dentin is influenced by variations in the curing… 
1998
1998
Polishing and coating of dental ceramic materials with 308 nm XeCl excimer laser radiation.
By clicking accept or continuing to use the site, you agree to the terms outlined in our Privacy Policy (opens in a new tab), Terms of Service (opens in a new tab), and Dataset License (opens in a new tab)