Skip to search formSkip to main content
You are currently offline. Some features of the site may not work correctly.

Dusting or Polishing Furniture or a Polishing Car

Known as: Dusting/polishing furniture or polishing car 
A question about an individual's ability to dust or polish furniture or polish a car.
National Institutes of Health

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2018
2018
In this paper the status of research activities at ILCHiGrade Lab (DESY/University of Hamburg) on Centrifugal Barrel Polishing… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2018
2018
Centrifugal barrel polishing (CBP) is a simple and environmentally friendly method that can be applied for mechanical abrasion of… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2013
2013
Centrifugal barrel polishing (CBP) for SRF application is becoming more widespread as the technique for cavity surface… Expand
  • table 1
  • figure 3
  • figure 1
  • figure 2
  • figure 4
Is this relevant?
2013
2013
Fermilab has successfully demonstrated the ability to improve the performance of damaged 1.3 GHz single cell and 9-cell Tesla… Expand
  • table 1
  • figure 1
  • figure 4
  • figure 2
  • figure 3
Is this relevant?
2012
2012
We performed Centrifugal Barrel Polishing (CBP) on a 1.3 GHz fine grain TESLA single cell cavity and 1.5 GHz fine grain CEBAF… Expand
  • figure 1
  • figure 2
  • figure 3
Is this relevant?
2012
2012
This paper summarizes the IEC/86B, Working Group 6 research on impact of polishing scratches on 40G NRZ link performance. This… Expand
  • figure 1
  • figure 2
  • figure 3
Is this relevant?
2011
2011
We performed Centrifugal Barrel Polishing (CBP) on single crystal niobium samples/coupons housed in a stainless steel sample… Expand
  • figure 1
  • table 1
  • figure 2
  • figure 4
  • figure 3
Is this relevant?
2010
2010
Nine 1.3 GHz 9-cell superconducting cavities (MHI-01 ~ 09) were fabricated from 2005 to 2009 at KEK-STF for International Linear… Expand
  • figure 1
  • figure 2
  • figure 3
  • table 1
  • figure 5
Is this relevant?
2001
2001
Two 5-cell cavities (600MHz, β=0.60) were fabricated for installing into the prototype cryomodule at JAERI. Before assembling the… Expand
  • figure 1
  • figure 2
  • table 2
  • figure 4
  • figure 5
Is this relevant?
2000
2000
To date, KEK has developed cleaning techniques for superconducting niobium RF cavities. These include: electro-polishing (EP… Expand
  • figure 2
  • figure 1
  • figure 4
  • figure 7
  • figure 8
Is this relevant?