Skip to search formSkip to main content
You are currently offline. Some features of the site may not work correctly.

DFM analysis for stereolithography

Known as: Rule Based DFM analysis for Stereolithography 
Stereolithography is an Additive manufacturing process. In this process, parts are built from a photo-curable liquid resin that cures when exposed to… Expand
Wikipedia

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2018
2018
A three-dimensional (3-D) printed W-band slotted waveguide array antenna (SWAA) is proposed. The proposed SWAA consists of three… Expand
  • figure 1
  • figure 3
  • figure 2
  • figure 4
  • figure 5
2017
2017
Introduction & Objectives Transcranial magnetic stimulation (TMS) is a method for focal noninvasive cortical stimulation where… Expand
2013
2013
Soil water evaporation is an important parameter that needs to be accurately measured for the design of water-efficient… Expand
  • figure 1
  • figure 2
  • figure 4
  • figure 5
  • figure 6
2012
2012
A set of design for manufacturing (DFM) techniques have been developed and applied to 45nm, 32nm and 28nm logic process… Expand
2008
2008
Abstract Data envelopment analysis (DEA) has become an established benchmark tool in efficiency strategies in both the public and… Expand
2007
2007
Solid Freeform Fabrication methods based on photopolymeri zation (e.g. stereolithography SLA, digital light processing DLP, two… Expand
  • figure 1
  • figure 2
  • table 1
  • figure 3
  • table 2
2005
2005
We consider modern design for manufacturing (DFM) as a manifestation of IC industry re-integration and intensive cost management… Expand
2005
2005
Nanostructured materials and exploiting their properties in stereolithography (SL) may open new markets for unique rapidly… Expand
2001
2001
To address the conflicting requirements between holding specified surface quality and decreasing build time in layered… Expand
  • figure 1
  • figure 5
  • figure 2
  • figure 3
  • figure 4
2000
2000
Ceramic StereoLithography (CSL) is used to fabricate complex shaped ceramic powder compacts by laser photocuring a concentrated… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4