Skip to search formSkip to main contentSkip to account menu

Circuit Board Device Component

Known as: Circuit Board 
A non-conducting board to which electronic components are attached.
National Institutes of Health

Related topics

Related topics

1 relation
Medical Device Component or Accessory

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
Highly Cited
2011
Highly Cited
2011
On-Board Printed Coupled-Fed Loop Antenna in Close Proximity to the Surrounding Ground Plane for Penta-Band WWAN Mobile Phone
A small-size coupled-fed loop antenna suitable to be printed on the system circuit board of the mobile phone for penta-band WWAN… 
2011
2011
A Compact EADFB Laser Array Module for a Future 100-Gb/s Ethernet Transceiver
A compact electroabsorption modulators integrated distributed feedback (EADFB) laser array module has been developed for 100-Gb/s… 
Highly Cited
2010
Highly Cited
2010
Printed Single-Strip Monopole Using a Chip Inductor for Penta-Band WWAN Operation in the Mobile Phone
A single-strip monopole capable of generating two wide operating bands at about 900 and 1900 MHz covering GSM850/900/1800/1900… 
Highly Cited
2009
Highly Cited
2009
Simple Folded Monopole Slot Antenna for Penta-Band Clamshell Mobile Phone Application
An internal clamshell mobile phone antenna using a simple dual-band folded monopole slot for covering penta bands of WWAN… 
Highly Cited
2008
Highly Cited
2008
Printed Loop Antenna With a Perpendicular Feed for Penta-Band Mobile Phone Application
A promising printed loop antenna is described that can be mounted in perpendicular to the top edge of the system circuit board of… 
2007
2007
60-GHz System-on-Package Transmitter Integrating Sub-Harmonic Frequency Amplitude Shift-Keying Modulator
This paper proposes a simple low-temperature co-fired ceramic (LTCC) integrated transmitter using sub-harmonic amplitude shift… 
Highly Cited
2002
Highly Cited
2002
Integrated RF architectures in fully-organic SOP technology
Future wireless communications systems require better performance, lower cost, and compact RF front-end footprint. The RF front… 
Highly Cited
1997
Highly Cited
1997
What is the optimum phased array coil design for cardiac and torso magnetic resonance?
To determine the optimum configuration of a phased array MR coil system for human cardiac applications, the sensitivity of 10… 
Highly Cited
1992
Highly Cited
1992
A CMOS low-voltage-swing transmission-line transceiver
A simplified representation of a bidirectional transmission line with I/O transceiver cells is shown. The drivers are open-drain… 
Review
1983
Review
1983
Sensor-based robotic assembly systems: Research and applications in electronic manufacturing
The analysis, design, and evaluation of robotic systems for manufacturing applications require understanding of sensing… 
By clicking accept or continuing to use the site, you agree to the terms outlined in our Privacy Policy (opens in a new tab), Terms of Service (opens in a new tab), and Dataset License (opens in a new tab)