Bend radius

Known as: Macrobend, Macrobend loss, Bending radii 
Bend radius, which is measured to the inside curvature, is the minimum radius one can bend a pipe, tube, sheet, cable or hose without kinking it… (More)
Wikipedia

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
Highly Cited
2013
Highly Cited
2013
Established design and fabrication guidelines exist for achieving a variety of motions with soft actuators such as bending… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 5
  • figure 4
Is this relevant?
2011
2011
Reducing the thickness of crystalline silicon wafers has evolved in the solar industry. As of 2010, most of the silicon solar… (More)
Is this relevant?
2010
2010
We characterize an approach to make compact low loss silica on silicon waveguides and achieve good agreement with theory. Record… (More)
  • figure 1
  • figure 3
  • figure 2
  • figure 4
  • figure 5
Is this relevant?
2009
2009
We demonstrate the feasibility of all-solid G.652.D fibers that exhibit bend losses 10 times lower than ITU-T recommendation G… (More)
Is this relevant?
2009
2009
The characteristics of a macrobending fiber used as an optical flowmeter are discussed. When a liquid flows through the bending… (More)
  • figure 1
  • figure 4
  • figure 2
  • figure 5
  • figure 3
Is this relevant?
2009
2009
A new ultra-low bending loss single-mode fiber with ring comprising nanometer sized features is designed and manufactured… (More)
  • figure 1
  • figure 2
  • figure 4
  • figure 3
  • figure 5
Is this relevant?
2009
2009
The field sequential color (FSC) mechanism can effectively generate multi-primary color fields in temporal sequence to form a… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • table I
Is this relevant?
2006
2006
We examine theoretically the transmission characteristics of the Single mode-Multimode-Single mode (SMS) fiber structures when… (More)
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2005
2005
In order to comply with impending legislative regulations in Europe (WEEE) and Japan and meet market demand for environmentally… (More)
  • table I
  • figure 2
  • table II
  • figure 4
  • figure 3
Is this relevant?
1986
1986
The problem of wiring pairs of points with wires having at most one bend is considered. We develop an 0(n*) algorithm to… (More)
  • figure 1.1
  • figure 1.2
  • figure 2.1
  • figure 2.2
  • figure 2.3
Is this relevant?