Subarea simulation and distributed computing of direct laser fabrication

@article{Wang2013SubareaSA,
  title={Subarea simulation and distributed computing of direct laser fabrication},
  author={Fu Yu Wang and Weijun Liu and Yuhui Zhao and Youbin Lai and Wen Chao Han},
  journal={The International Journal of Advanced Manufacturing Technology},
  year={2013},
  volume={71},
  pages={667 - 673},
  url={https://api.semanticscholar.org/CorpusID:109095141}
}
The novel approach shows that a large-scale workpiece can be divided into several subareas for simulation such that finite element computation can be distributed to a certain number of computers working simultaneously.
View on Springer
ir.sia.cn
1 Citation

One Citation

Parametric Optimization of Laser Additive Manufacturing of Inconel 625 Using Taguchi Method and Grey Relational Analysis

The results show that the most significant effect in processing parameters on surface roughness and width error are both overlapping rate and the optimal levels of laser power, scanning speed, powder feeder rate, and overlapping rate are 1800 W, 8 mm/s, 10 g/min, and 30%, respectively.

21 References

Studies on profile error and extruding aperture for the RP parts using the fused deposition modeling process

Fused deposition modeling (FDM) is one of the leading rapid prototyping processes for producing acrylonitrile butadiene styrene prototypes. However, the extruding accuracy in part fabrication is…

Modelling micro geometrical profiles in fused deposition process

Fused deposition modelling is an established additive manufacturing technique for creating functional prototypes from three-dimensional computer-aided design models. Despite of the potential…

Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel

Direct Laser Fabrication process with coaxial powder projection of 316L steel. Geometrical characteristics and microstructure characterization of wall structures

Three-dimensional heat transfer analysis of LENSTM process using finite element method

Laser-engineered net shaping, referred to as LENSTM process, is an additive manufacturing technique for building metallic parts, layer by layer, by direct deposition of metal powders in a melt pool…

Temperature/Stress Field Numerical Simulation of Hollow Blade Produced by Laser Rapid Forming

A transient temperature/stress field finite-element model for the laser rapid forming(LRF) process of a hollow blade of aeroengine is developed.The deposition process is simulated with the finite…

Three-dimensional finite element analysis of thermal stress in single-pass multi-layer weld-based rapid prototyping

Top surface quality research for direct metal laser fabrication

Purpose – The purpose of this paper is to describe the stability and properties of the direct metal laser fabrication (DMLF) process, by putting forward top surface quality (TSQ), which could be a…

Three-dimensional transient finite element analysis of the selective laser sintering process

Simulation of dynamic temperature field during selective laser sintering of ceramic powder

It is difficult to obtain the dynamic temperature field and the variation pattern with the experimental method as the temperature field changes very fast in the laser sintering process. In this…