Sandwich Structure Type RF-MEMS Variable Capacitor with Low Voltage Controllability and Wide Tuning Range

@article{Nishimoto2008SandwichST,
  title={Sandwich Structure Type RF-MEMS Variable Capacitor with Low Voltage Controllability and Wide Tuning Range},
  author={Taku Nishimoto and Kiichi Yamashita and Kenichi Ohhata},
  journal={IEICE Trans. Commun.},
  year={2008},
  volume={91-B},
  pages={572-574},
  url={https://api.semanticscholar.org/CorpusID:20160882}
}
Simulation results show that the proposed sandwich structure type RF-MEMS variable capacitor can operate at a control voltage of less than 3.2V and achieves a tuning range of 4.8:1 (capacitance: 630-130fF).

MEMS tunable capacitor with wide tuning range using multiple voltage sources

This paper presents a MEMS surface micro-machined varactor. The dynamic range of this class of varactors is governed by pull-in instability which is ideally one-third of the initial gap between the

Two lateral RF MEMS varactors and an experimental switch made using a CMOS-MEMS process

An expanding wireless industry creates a demand for smaller and smarter devices, while maintaining the high performance requirements. Todays solutions often use off-chip components to meet these

RF MEMs variable capacitors for tunable filters

() ABSTRACT: An RF MEMs microelectromechanical system variable capacitor has been demonstrated with a 22:1 tuning range, tuning from 1.5 to 33.2 pF of capacitance. This capacitor was constructed

Two Novel Structures for Tunable MEMS Capacitor with RF Applications

Abstract—Two novel structures for high-Q MEMS tumble capacitors are presented. The proposed designs include full plate as well as the comb structured capacitors. They can be fabricated employing

High-Q millimeter-wave MEMS varactors: extended tuning range and discrete-position designs

This paper presents the design, fabrication and measurement of two high-Q micro-electro-mechanical (MEMS) varactors suitable for 20-60 GHz applications. The varactors are composed of a movable bridge

Two movable plate nitride loaded MEMS variable capacitor

A MEMS variable capacitor having two movable plates loaded with a Nitride layer is proposed. A trench in the silicon substrate underneath the capacitor is used to decrease the parasitic capacitance.

A high-Q tunable micromechanical capacitor with movable dielectric for RF applications

A high-Q, tunable, micromechanical capacitor has been realized using an IC-compatible, electroplated-metal surface micromachining technology and demonstrated with quality (Q-) factors in excess of

Microwave MEMS-based voltage-controlled oscillators

A microwave voltage-controlled oscillator (VCO) based on coupled bonding wire inductors and microelectromechanical system (MEMS)-based variable capacitors for frequency tuning is demonstrated in this

MEMS variable capacitor versus MOS variable capacitor for a 5GHz voltage controlled oscillator

MEMS variable capacitors (varicaps) are an alternative to MOS and PN junction varicaps as a tuning element in voltage controlled oscillators. There is however no comparative data available on

Micromachined electro-mechanically tunable capacitors and their applications to RF IC's

Micromachined electro-mechanically tunable capacitors with two and three parallel plates are presented. Experimental devices have been fabricated using a standard polysilicon surface micromachining

Development of a wide‐tuning‐range two‐parallel‐plate tunable capacitor for integrated wireless communication systems

A micromachined parallel‐plate tunable capacitor with a wide tuning range and a component quality factor of 30@5 GHz and a self‐resonant frequency far beyond 5 GHz has been achieved.