Skip to search formSkip to main content
You are currently offline. Some features of the site may not work correctly.

Work hardening (regime/therapy)

Known as: work hardening 
 
National Institutes of Health

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2018
2018
Extremely high strength and work hardening ability in a metastable high entropy alloy
Design of multi-phase high entropy alloys uses metastability of phases to tune the strain accommodation by favoring… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2017
2017
Plastic Deformation through Dislocation Saturation in Ultrasmall Pt Nanocrystals and Its in Situ Atomistic Mechanisms.
The atomic-scale deformation dynamic behaviors of Pt nanocrystals with size of ∼18 nm were in situ investigated using our… Expand
  • figure 2
  • figure 1
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2017
2017
Application of the Constitutive Model in Finite Element Simulation: Predicting the Flow Behavior for 5754 Aluminum Alloy during Hot Working
The flow behavior of 5754 aluminum alloy was researched using the plane strain compression test for the range of 300–500 °C and 0… Expand
  • figure 1
  • table 1
  • figure 1
  • figure 1
  • figure 5
Is this relevant?
2017
2017
Investigation into SEU Effects and Hardening Strategies in SRAM Based FPGA
The mitigation of single event upset (SEU) in SRAM based Field Programmable Gate Array (FPGA) is increasingly important as it is… Expand
  • figure 1
  • figure 3
  • figure 4
  • figure 2
  • figure 5
Is this relevant?
2015
2015
A Novel Low Power Bitcell Design Featuring Inherent SEU Prevention and Self Correction Capabilities
The pursuit of continuous scaling of electronic devices in the semiconductor industry has led to two unintended but significant… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2014
2014
Work hardening behavior of the extruded and equal-channel angularly pressed Mg–Li–Zn alloys under tensile and shear deformation modes
Abstract The flow and work hardening behaviors of extruded and equal-channel angularly pressed (ECAPed) Mg–6Li–1Zn (LZ61) and Mg… Expand
  • figure 1
  • figure 2
  • figure 3
  • figure 4
  • figure 5
Is this relevant?
2014
2014
SEU Hardening: Incorporating an Extreme Low Power Bitcell Design (SHIELD)
The pursuit of continuous scaling of electronic devices in the semiconductor industry has led to two unintended but significant… Expand
  • figure 1
  • figure 2
  • figure 4
  • table I
  • figure 3
Is this relevant?
2010
2010
Characterization of the Bake-hardening Behavior of Transformation Induced Plasticity and Dual-phase Steels Using Advanced Analytical Techniques
The bake-hardening (BH) behavior of TRansformation Induced Plasticity (TRIP) and Dual-Phase (DP) steels after intercritical… Expand
  • table 1
  • figure 1
  • figure 3
  • figure 2
  • table 3
Is this relevant?
1999
1999
SINTER-HARDENING P/M STEELS
The use of P/M structural parts is growing in part due to the use of the sinter-hardening process which utilizes high performance… Expand
  • figure 1
  • figure 2
  • figure 3
  • table I
  • figure 4
Is this relevant?
1996
1996
HARDENING-EFFEKT. TEIL 1. UBERBLICK UND STAND DER FORSCHUNG
 
Is this relevant?
By clicking accept or continuing to use the site, you agree to the terms outlined in our Privacy Policy, Terms of Service, and Dataset License
ACCEPT & CONTINUE