Skip to search formSkip to main content
You are currently offline. Some features of the site may not work correctly.

Replacement of prosthetic heart valve poppet

 
National Institutes of Health

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2016
2016
Two main research paths are being followed to develop compression ignition (CI) engines, the extreme optimization of the… Expand
  • table 1
  • figure 1
  • table 2
  • figure 2
  • table 3
2015
2015
Gated irrigation pipes are an important tool for improving surface irrigation, it's development on depends on replacing the gates… Expand
2014
2014
Friction welded joints are formed in the solid state by the heat generated by friction. As the technological advancements take… Expand
2007
2007
For a metering poppet valve which was developed at the University of Missouri (MU valve), the valve can be configured for… Expand
  • figure 1.1
  • figure 1.2
  • figure 2.1
  • figure 2.2
  • figure 2.3
2006
2006
c l e he Starr-Edwards caged-ball prostheis for cardiac valve replacement was rst successfully used in the mitral poition in… Expand
1989
1989
Abstract The early Starr-Edwards prosthetic heart valve models (series 1000, 1200 and 1260) contained no cloth on the inner… Expand
1984
1984
A 65 year old patient had his mitral and aortic valves replaced with two Braunwald-Cutter prostheses in 1973. Seven years later… Expand
1976
1976
Embolization of a prosthetic valve poppet, a rare complication following valve replacement, has been, until recently, generally… Expand
Highly Cited
1975
1975
1975
Diastolic murmurs associated with the Starr-Edwards mitral prosthesis have not been described previously. In this report, five… Expand
  • table 1
  • figure 1
  • figure 3
  • figure 2
  • figure 4