Skip to search formSkip to main contentSkip to account menu

PLECKSTRIN AND SEC7 DOMAINS-CONTAINING PROTEIN 4

Known as: EFA6B, EXCHANGE FACTOR FOR ARF6, B, TELOMERIC OF INTERLEUKIN 1 CLUSTER 
National Institutes of Health

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2015
2015
Study of Coated TiN and TiC on Cutting Tools for the PVD and CVD Coated Tungsten Carbide by Sand Blasting Pretreatment of Nickel and Carbon
It has been well established that advanced surface coatings on cutting tools improve wear resistance by modifying the contact… 
2014
2014
Auto-alignment Status of the Taiwan Photon Source
Taiwan Photon Source (TPS) is a new 3-GeV ring under construction at NSRRC in Taiwan. There are hundreds of magnets placed on… 
2014
2014
Study on the Performance of Laser Cladding Ni/TiC on the Surface of Mold Steel
Mold failure usually starts from the surface. The mold life expectancy can be effectively extended by improving the surface… 
2014
2014
Sliding Wear Behavior of Alumina / Tic Coated Steel Produced by Plasma Spray Technique T
ISSN 2277-5056 | © 2014 Bonfring Abstract--Carbide coatings exhibit good resistance to wear and has an increased hardness which… 
2013
2013
Propiedades de las Peliculas de TiN/TiC Crecidas por la Técnica de Arco Pulsado
Los recubrimientos de TiN/TiC fueron depositados por la tecnica de Deposicion Fisica en Fase de Vapor asistida por Plasma (PAPVD… 
2010
2010
Study of high-temperature thermal stability of max phases in vacuum
The susceptibility of two MAX phases (Ti2AlN and Ti4AlN3) to high-temperature thermal dissociation in a dynamic environment of… 
2009
2009
Surface Modification of TiC–NiCrAl Hard Alloy by Pulsed Electron Beam
The mechanisms by which nanostructural states are realized in e-beam-irradiated TiC-NiCrAl cermet depending on the irradiation… 
2008
2008
Laser surface treatment of magnesium alloy with WC and TiC powders using HPDL
AbstrAct Purpose: The aim of this work was to improve the surface layer cast magnesium alloy EN-MCMgAl6Zn1 by laser surface… 
2003
2003
Fabrication and Microstructure Characterization of Ti3SiC2 Synthesized from Ti/Si/2TiC Powders Using the Pulse Discharge Sintering (PDS) Technique
Ti/Si/2TiC powders were prepared using a mixture method (M) and a mechanical alloying (MA) method to fabricate Ti3SiC2 at 1200… 
1988
1988
Analysis of TiN by charged particle beams: Nuclear reaction analysis, nuclear reaction broadening and Rutherford backscattering☆
By clicking accept or continuing to use the site, you agree to the terms outlined in our Privacy Policy (opens in a new tab), Terms of Service (opens in a new tab), and Dataset License (opens in a new tab)