Skip to search formSkip to main contentSkip to account menu

MPC5xx

Known as: MPC555, MPC565 
The MPC5xx family of processors such as the MPC555 and MPC565 are 32-bit PowerPC embedded microprocessors that operate between 40 and 66 MHz and are… 
Wikipedia (opens in a new tab)

Related topics

Related topics

13 relations
32-bitAnalog-to-digital converterEngine control unitFlash memory

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2011
2011
Construction of an obstacle map and its realtime implementation on an Unmanned Ground Vehicle
This paper presents the development of an obstacle mapping system based on the concept of a Probabilistic Threat Exposure Map… 
2008
2008
Design and hardware-in-the-loop test of the embedded control system of an indoor quadrotor helicopter
The paper deals with the quick prototype design and hardware-in-the-loop real-time test of the embedded control system of an… 
2008
2008
Software Implemented Detection and Recovery of Soft Errors in a Brake-by-Wire System
This paper presents an experimental study of the impact of soft errors in a prototype brake-by-wire system. To emulate the… 
2007
2007
Testing 32-bit embedded system using hardware-in-the-loop-simulation of automatic transmission
Drivers are becoming more fatigued and uncomfortable as traffic densities increase, which can lead to slower reaction time. They… 
2006
2006
Four-Wire Unidirectional Three-Phase/Level/Switch (VIENNA) Rectifier
This paper presents a four-wire Vienna rectifier (VIENNA4) and proposes a control system capable of balancing the partial DC link… 
2006
2006
Application of CAN Bus to HEV Based on MPC5xx Microcontroller
In this paper, CAN Bus, which works in good real-time and high reliability, was designed and programmed based on 32-bit CPU… 
2005
2005
Experimental dependability evaluation of a fail-bounded jet engine control system for unmanned aerial vehicles
This paper presents an experimental evaluation of a prototype jet engine controller intended for unmanned aerial vehicles (UAVs… 
2004
2004
Experimental results of vector controlled and vector modulated VIENNA I rectifier
This paper presents the practical realisation of a novel three-level vector modulation method applied to a vector controlled… 
2002
2002
Massively Distributed Control Nets for Modular Reconfigurable Robots
Massively Distributed Control Nets (MDCN) is a CAN (Controller Area Network) based high-level protocol that has the following… 
2001
2001
RABBIT-a modular rapid-prototyping platform for distributed mechatronic systems
A basic idea of the mechatronic design is to decompose a mechatronic system into subsystems in order to make the complex… 
By clicking accept or continuing to use the site, you agree to the terms outlined in our Privacy Policy (opens in a new tab), Terms of Service (opens in a new tab), and Dataset License (opens in a new tab)