Skip to search formSkip to main contentSkip to account menu

CABLES1 gene

Known as: INTERACTOR WITH CDK3 1, IK3-1, Cdk5 and Abl enzyme substrate 1 
National Institutes of Health

Papers overview

Semantic Scholar uses AI to extract papers important to this topic.
2017
2017
Influence of catwalk design parameters on the galloping of constructing main cables in long-span suspension bridges
A main cable of a long-span suspension bridge is semi-surrounded by a catwalk during construction. Thus, design parameters of a… 
2009
2009
Design Techniques for EMC Part 2 — Cables and Connectors
Eur Ing Keith Armstrong CEng MIET MIEEE ACGI BSc(hons) Partner, Cherry Clough Consultants, www.cherryclough.com, Associate of EMC… 
2009
2009
A robust multi-conductor transmission line model to simulate EM transients in underground cables
This paper introduces a new mesh-domain model to simulate time-domain transients in underground cables accurately considering… 
2008
2008
Characterization of the Noise Properties of DC to DC Converters for the sLHC
The upgrade of the LHC experiments sets new challenges for the powering of the detectors. One of the powering schemes under study… 
2005
2005
Long-term testing and applications of high-stress MV EPR cables
High-stress design 35-kV ethylene propylene rubber (EPR)-insulated cables with 1.14-mm (45-mil) wall reduction have been in… 
2003
2003
Measurement of the current distribution near a substation during a single phase to ground fault
During a single phase to ground fault at a HV/MV substation, a significant part of the fault current returns via the skywires or… 
2003
2003
Fault Detector and Length Measurement of Electric Cables Based on Frequency Waves
2002
2002
Characterization of a twelve channel optical fiber, ribbon cable and MTP array connector assembly for space flight environments
Presented here is the second set of testing conducted by the Technology Validation Laboratory for Photonics at NASA Goddard Space… 
1987
1987
Development of a Cable Shield Tester for In-Situ Hardness Surveillance of Cables
A conceptual model of a shielded cable tester, capable of measuring the surface transfer impedance of cables installed on an… 
1976
1976
An injection-molded plastic connector for splicing optical cables
An injection-molded plastic splice connector for splicing optical cables has been fabricated and evaluated. Five optical cables… 
By clicking accept or continuing to use the site, you agree to the terms outlined in our Privacy Policy (opens in a new tab), Terms of Service (opens in a new tab), and Dataset License (opens in a new tab)