XXII. On the thermal effects of longitudinal compression of solids. and On the alterations of temperature accompanying changes of pressure in fluids

@article{JouleXXIIOT,
  title={XXII. On the thermal effects of longitudinal compression of solids. and On the alterations of temperature accompanying changes of pressure in fluids},
  author={James Prescott Joule and William Thomson},
  journal={Proceedings of the Royal Society of London},
  pages={564 - 569}
}
In the further prosecution of the experiments of which an outline was given in the ‘Proceedings’ for January 29, 1857, the author has verified the theory of Professor Thomson, as applied to the thermal effects of laying weights on and taking them off metallic pillars and cylinders of vulcanized india-rubber. Heat is evolved by compression, and absorbed on removing the compressing force in every substance yet experimented on. In the case of metals, the results agree very closely with the formula… 

Energy of the elastic loading of anharmonic solids

This paper reports on the results of measurements of changes in the temperature of a solid under the adiabatic elastic loading (thermoelastic effect), the coefficient of thermal expansion, and the

Mechanical equilibrium of a heated anharmonic solid

A new substantiation has been proposed for for the dependence of the dynamic part of the thermal energy of an anharmonic solid on its strain in terms of the perturbation theory in the anharmonicity

Dynamical effects induced by static elastic loading of solid bodies

Experimental data on two known effects arising in response to an adiabatic elastic loading of solid bodies are presented. These are the thermoelastic effect, which consist in a change in temperature

On the statistical distribution in a deformed solid

A modification of the Gibbs distribution in a thermally insulated mechanically deformed solid, where its linear dimensions (shape parameters) are excluded from statistical averaging and included

Dynamical Examinations of Vibrator Models, Describing Some Non Elastic Properties of Crystals

On the base of a vibrator atomic model the mechanical and thermal properties of the object are analyzed. The potential energy of the vibrator is represented by means of positive term with coordinate

Non-adiabatic heating of polymer films under drawing

BackgroundThe produced mechanical work at tensile drawing is converted into heat almost completely and the polymer temperature rises. The temperature rise at adiabatic drawing for different polymers

Experimental Methods and Instrumentation

Three types of measurements are usually used for the study of the thermal behavior of polymers under deformation: the temperature changes resulting from the deformation of the sample, the temperature