Wettability of SiC to aluminium and aluminium alloys

@article{Choh1987WettabilityOS,
  title={Wettability of SiC to aluminium and aluminium alloys},
  author={T. Choh and T. Oki},
  journal={Materials Science and Technology},
  year={1987},
  volume={3},
  pages={378-385}
}
  • T. Choh, T. Oki
  • Published 1987
  • Materials Science
  • Materials Science and Technology
AbstractThe wettability of SiC by pure aluminium and aluminium alloys has been measured using the dip coverage method. It was found that alloying elements such as silicon, manganese, iron, and elements of the IVA, VA, and VI groups improved wettability by decreasing the incubation period and/or increasing the wetting rate. It was possible to analyse, the wetting process by assuming that the wetting rate was proportional to the amount of nuclei on the interface and to the unwetted area. The… Expand
Wetting of polycrystalline SiC by molten Al and Al−Si alloys
The wetting of α-SiC by molten Al and Al–Si alloys was investigated using a dispensed sessile drop method in a high vacuum. In the Al–SiC system, representative wetting stages were identified. TheExpand
Effect of Si on the Wettability of SiC/Al System
In this paper, Si was added to the Al alloy to research its effect on the wettability between SiC and Al at 1000°C. The results showed that the contact angle decreased with the increase of Si contentExpand
Survey on wetting of SiC by molten metals
Abstract Good wetting and low reactivity of metal/ceramic couples are key factors in many technological processes, in particular in metal/ceramic joining, to avoid degradation of ceramics and toExpand
Effects of sintering temperature and graphite addition on the mechanical properties of aluminum
Abstract The effects of different sintering temperatures, namely 400, 500 and 600 °C, on the mechanical properties of four aluminum–graphite alloys were reported. Different percentages of exfoliatedExpand
Evaluation of Wettability between Pure Aluminum and Lead, Lead-Tin by means of Interfacial Impedance Technique
In order to estimate the wettability between aluminum sheet and solder, the interfacial impedance response at the interface between soid aluminum and liquid lead or lead-tin alloys was measured. TheExpand
The wettability of silicon carbide by liquid aluminium: the effect of free silicon in the carbide and of magnesium, silicon and copper alloy additions to the aluminium
Results from the sessile-drop method are reported for the effects on wetting angle, θ, of free silicon in the silicon carbide substrate and of alloy additions of silicon, copper or magnesium to theExpand
Wetting behaviour in the Al-Si/SiC system: interface reactions and solubility effects
The sessile drop technique was used to study the wetting behavior of Al-Si alloys on SiC sintered ceramic substrates under vacuum in the 700--1,100 C temperature interval. Al-Si alloys with SiExpand
Characterization of Aluminum Alloy–Silicon Carbide Functionally Graded Materials Developed by Centrifugal Casting Process
The continuous development of modern industries rises the necessity for functionally graded materials. This research starts from the consideration that the incorporation of SiC particles in theExpand
SiC/Cu composites with tungsten coating prepared by powder metallurgy
Abstract A tungsten coating on SiC particles was produced using a sol–gel technique followed by reduction treatment in hydrogen for the first time. The microstructure and properties of Cu compositesExpand
CAST 6061 Al-SiCp COMPOSITES: PREPARATION AND PROPERTIES
Aluminium alloy (6061) - SiC particle composites containing upto 15 wt% SiCp have been prepared by direct casting technique. Pre-treatment of alloy ingots prior to melting and additions of smallExpand
...
1
2
3
4
5
...

References

SHOWING 1-5 OF 5 REFERENCES
SiC繊維(Nicalon)とAlとの界面反応およびZrCバリヤの被覆効果
The chemical reaction between commercially available SiC fiber (NICALON) and aluminum at elevated temperatures up to 750°C (1, 023 K) has been studied using monofilament composite specimens producedExpand
Joining of Dense Silicon Carbide by Aluminum Metal
SiC焼結体に対するAlのろう付け性を検討した. 薄いAl板を用い, 反応焼結及び常圧焼結SiC焼結体を800℃と1000℃, 真空中で高周波加熱することにより接合し, 室温から550℃にわたる温度範囲で4点曲げ強度を測定した. 接合体の4点曲げ強度は, 室温で10-25kg/mm2 (100-250MPa), 400℃で5-15kg/mm2 (50-150MPa) であった.Expand
Thermochemistry for steelmaking