Wear properties of dental ceramics and porcelains compared with human enamel.

@article{DArcangelo2016WearPO,
  title={Wear properties of dental ceramics and porcelains compared with human enamel.},
  author={Camillo D'Arcangelo and Lorenzo Vanini and Giuseppe Daniele Rondoni and Francesco de Angelis},
  journal={The Journal of prosthetic dentistry},
  year={2016},
  volume={115 3},
  pages={
          350-5
        }
}

Figures and Tables from this paper

Wear Properties of Different Additive Restorative Materials Used for Onlay/Overlay Posterior Restorations.
TLDR
The heat-cured resin-based composite material Enamel Plus Bio-Function and the type III gold alloy demonstrated similar mean values for wear depth and volumetric loss.
Wear Evaluation of Prosthetic Materials Opposing Themselves.
TLDR
The purpose of the present in vitro study was to compare the two-body wear resistance of a type 3 gold alloy, two lithium disilicate glass ceramics, and two opposing antagonistic cusps made out of the same restorative materials.
Wear Characteristics of Dental Ceramic CAD/CAM Materials Opposing Various Dental Composite Resins
TLDR
Zirconia showed significantly less volumetric loss than lithium disilicate or leucite regardless of composite resin type, and Estelite Σ Quick showed significantly more weight loss than Filtek Supreme Ultra, MI Gracefil, or Gradia Direct P regardless of ceramic type.
Wear and Microhardness of Three Different Types of CAD/CAM Ceramic Materials
  • S. Salem
  • Materials Science, Medicine
    Egyptian Dental Journal
  • 2019
TLDR
Vita Enamic showed the worst wear behavior and the least abrasiveness to enamel while, IPS e.max CAD and Celtra Duo showed comparable wear behavior, abrasiveness and microhardness against enamel.
Wear resistance and compression strength of ceramics tested in fluoride environments.
Evaluation of Wear and Surface Roughness of Different CAD/CAM Monolithic Ceramic Materials
  • M. Attia
  • Materials Science, Medicine
    Egyptian Dental Journal
  • 2021
TLDR
The different types of tested ceramics showed similar wear resistance when opposed to monolithic zirconia and surface roughness was analyzed by using a digital image analysis software program.
WEAR OF HUMAN ENAMEL OPPOSING ULTRA-TRANSLUCENT ZIRCONIA WITH TWO SURFACE FINISHING PROCEDURES
ABSTRACT Introduction: With the advancement of material technology, CAD-CAM zirconia restorations have become increasingly popular. Their influence on the opposing tooth surface wear requires further
WEAR RESISTANCE OF DENTAL MATERIALS WHICH ARE USED FOR ANTERIOR TEETH RESTORATIONS.
TLDR
It can be stated that dental composite resin and leucite ceramics may be proposed as the materials of choice for anterior restoration of teeth because they have shown the good wear resistance and tolerance to antagonizing natural teeth.
Wear resistance of crowns made from different CAM/CAD materials.
  • S. WilleKim SieperM. Kern
  • Materials Science, Medicine
    Dental materials : official publication of the Academy of Dental Materials
  • 2021
...
...

References

SHOWING 1-10 OF 54 REFERENCES
Wear properties of a novel resin composite compared to human enamel and other restorative materials.
TLDR
Heat-cured HRi function and Aurocast8 showed similar mean values for wear depth and volumetric loss, and their results did not statistically differ in comparison with the human enamel.
An evaluation of wear when enamel is opposed by various ceramic materials and gold.
Wear of human enamel opposing monolithic zirconia, glass ceramic, and composite resin: an in vitro study.
Three-body wear potential of dental yttrium-stabilized zirconia ceramic after grinding, polishing, and glazing treatments.
Wear resistance of a pressable low-fusing ceramic opposed by dental alloys.
Abrasion of Human Enamel by Different Dental Ceramics in vitro
TLDR
Dicor and Dicor coated with a shading porcelain were found to cause the lowest wear of enamel, and Knoop hardness showed poor correlation with the results of the abrasive testing.
Evaluation of wear: enamel opposing three ceramic materials and a gold alloy.
Enamel wear caused by three different restorative materials.
Wear of ceramic and antagonist--a systematic evaluation of influencing factors in vitro.
...
...