Volumetric additive manufacturing via tomographic reconstruction

@article{Kelly2019VolumetricAM,
  title={Volumetric additive manufacturing via tomographic reconstruction},
  author={Brett E Kelly and Indrasen Bhattacharya and H. Heidari and M. Shusteff and C. Spadaccini and H. Taylor},
  journal={Science},
  year={2019},
  volume={363},
  pages={1075 - 1079}
}
Fabrication goes for a quick spin Most 3D printing techniques involve adding material layer by layer. This sets some limitations on the types of applications for which 3D printing is suitable, such as printing around a preexisting object. Kelly et al. present a different method for manufacturing by rotating a photopolymer in a dynamically evolving light field (see the Perspective by Hart and Rao). This allowed them to print entire complex objects through one complete revolution, circumventing… Expand
How to print a 3D object all at once
TLDR
Kelly et al. (2) report a method to form an entire 3D object at once through light-initiated polymerization within a container of high-viscosity resin. Expand
High-resolution tomographic volumetric additive manufacturing
TLDR
It is shown that a low-étendue illumination system enables the production of high-resolution features, and an integrated feedback system is demonstrated to accurately control the photopolymerization kinetics over the entire build volume and improve the geometric fidelity of the object solidification. Expand
Scalable additive manufacturing via integral image formation
TLDR
The proposed lens array-based integral imaging system provides the concurrent ability to scale-up and scale-down incoming image fields, thereby enabling the scalable stereolithographic fabrication of three-dimensional features that surpass the resolution-to-area scaling limit. Expand
Light-based Volumetric Additive Manufacturing in Scattering Resins
3D printing has revolutionized the manufacturing of volumetric components and structures for use in various fields. Owing to the advent of photo-curable resins, several fully volumetric light-basedExpand
Design of a tomographic projection lithography process for roll-to-roll fabrication of 3D microstructures
The rapid production of three-dimensional microstructures across areas of many square centimeters, such as in a roll-to-roll printing system, is needed for many applications such as microfluidicExpand
Emerging micro-additive manufacturing technologies enabled by novel optical methods
TLDR
This paper presents a comprehensive review of recent advances in micro-additive manufacturing enabled by novel optical methods with an emphasis on photopolymerization-based printing processes, with a focus on innovative optical methods, e.g., ultrafast beam shaping, digital holography, and temporal focusing. Expand
Self-healing materials enable free-standing seamless large-scale 3D printing
Three-dimensional (3D) printing has had a large impact on various fields, with fused deposition modeling (FDM) being the most versatile and cost-effective 3D printing technology. However, FDM oftenExpand
Direct printing of functional 3D objects using polymerization-induced phase separation
TLDR
This study demonstrates how the spatial distribution of different material phases can be modulated by controlling the kinetics of gelation, cross-linking density and material diffusivity in vat polymerization through the judicious selection of photoresin components. Expand
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
TLDR
A stereolithographic three-dimensional printing approach for polymeric components that uses a mobile liquid interface (a fluorinated oil) to reduce the adhesive forces between the interface and the printed object, thereby allowing for a continuous and rapid print process, regardless of polymeric precursor. Expand
3D and 4D printing for optics and metaphotonics
Abstract Three-dimensional (3D) printing is a new paradigm in customized manufacturing and allows the fabrication of complex optical components and metaphotonic structures that are difficult toExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 44 REFERENCES
Computed axial lithography: volumetric 3D printing of arbitrary geometries (Conference Presentation)
TLDR
This work proposes and demonstrates a novel volumetric 3D printing technique based on one of the most ubiquitous computational imaging methods in the field: computed axial tomography, which is layer-less and does not involve any relative motion between the resin and the printed part, which has positive implications for mechanically isotropic part strength. Expand
Multiprocess 3D printing for increasing component functionality
TLDR
Multiprocess 3D printing is a nascent area of research in which basic 3Dprinting is augmented to fabricate structures with multifunctionality, which will lead to local manufacturing with customized 3D spatial control of material, geometry, and placement of subcomponents. Expand
Continuous liquid interface production of 3D objects
TLDR
The continuous generation of monolithic polymeric parts up to tens of centimeters in size with feature resolution below 100 micrometers is demonstrated and critical control parameters are delineated and shown that complex solid parts can be drawn out of the resin at rates of hundreds of millimeters per hour. Expand
One-step volumetric additive manufacturing of complex polymer structures
TLDR
A new volumetric additive fabrication paradigm is introduced that produces photopolymer structures with complex nonperiodic three-dimensional geometries on a time scale of seconds, indicating that low- absorbing resins containing ~0.1% photoinitiator may be successfully used to build full structures in ~1 to 10 s. Expand
Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning
TLDR
The inhibition volumes created using this method enable localized control of the polymerized region thickness to effect single-exposure, topographical patterning. Expand
3D scaffold fabrication with PPF/DEF using micro-stereolithography
Current studies on scaffold fabrication have focused on overcoming the limitations imposed by the mechanical properties of existing biodegradable materials and the irregular structures they produce.Expand
Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels.
TLDR
3D printing is finally positioned to challenge the pre-eminence of methods such as soft lithography for microfluidic device prototyping and fabrication, according to this paper's results. Expand
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Abstract Freedom of design, mass customisation, waste minimisation and the ability to manufacture complex structures, as well as fast prototyping, are the main benefits of additive manufacturing (AM)Expand
3D Printing All-Aromatic Polyimides using Mask-Projection Stereolithography: Processing the Nonprocessable.
TLDR
This study demonstrates the unprecedented 3D printing of PMDA-ODA using mask-projection stereolithography, and the preparation of high-resolution 3D structures without sacrificing bulk material properties. Expand
Applications of additive manufacturing in dentistry: A review.
TLDR
An overview of the AM process is given and the applications of 3D printing in dentistry are reviewed, as anatomical models can be created at ease using AM. Expand
...
1
2
3
4
5
...