Vibration control of a SCARA manipulator using pseudo-polynomial motion laws

@article{Incerti2008VibrationCO,
  title={Vibration control of a SCARA manipulator using pseudo-polynomial motion laws},
  author={Giovanni Incerti},
  journal={2008 IEEE/RSJ International Conference on Intelligent Robots and Systems},
  year={2008},
  pages={2802-2807}
}
The paper describes a motion planning procedure aimed to vibration control of industrial robots for assembly operations. The proposed technique is based on a ldquopre-shapingrdquo of the motion profiles assigned to each degree of freedom of the machine. A mathematical model is used to simulate the dynamic behaviour of the manipulator and an optimization procedure, based on mathematical programming techniques, is employed for the automatic selection of the motion laws that allow vibration… CONTINUE READING

References

Publications referenced by this paper.
Showing 1-10 of 12 references

Input shaping reference commands for trajectory following Cartesian machines

  • G. Pelaez, Pelaez Gu., M. PerezJ., A. Vizan, E. Bautista
  • Control Engineering Practice
  • 2005

Input shaping reference commands for trajectory following Cartesian machines, Control Engineering Practice

  • G. Pelaez, Gu. Pelaez, J. M. Perez, A. Vizan, E. Bautista
  • 2005
1 Excerpt

Cam design and Manufacturing Handbook

  • R. L. Norton
  • 2002
1 Excerpt

Command Shaping Nonlinear Inputs Using Basis Functions

  • M. J. Agostini, G. G. Parker
  • Journal of Intelligent Material Systems and…
  • 2002
1 Excerpt

Human interface and vibration control of robotic manipulator suspended from ceiling, Transactions of the Institute of Measurement and Control

  • Y. Takahashi, M. Yashige, M. Nakamura, E. Hirata
  • 2002
1 Excerpt

Dynamic simulation model for mixed-loop planar robots with flexible joint drives

  • M.H.F. Dado, N. S. Al-Huniti, A. K. Eljabali
  • Mechanism and Machine Theory, vol
  • 2001
1 Excerpt

Pre-shaping motion input for a rotating flexible link

  • G. Mimmi, P. Pennacchi
  • International Journal of Solids and Structures
  • 2001
1 Excerpt

Residual swing/vibration reduction using a hybrid input shaping method, Mechanism and Machine Theory, vol

  • S. Kapucu, A. Gürsel, S. Bayseç
  • 2001
1 Excerpt

Gain-scheduling H∞ vibration control for SCARA-type robot manipulators via LMIs

  • Z. B. Kang, Y. Yin, S. Fujii, T. Y. Chai
  • Proc. of the American Control Conference,
  • 1997
1 Excerpt

Similar Papers

Loading similar papers…