Vibrating wires for beam diagnostics

@article{Arutunian2007VibratingWF,
  title={Vibrating wires for beam diagnostics},
  author={S G Arutunian and M.R.Mailian and Kay Wittenburg},
  journal={Nuclear Instruments \& Methods in Physics Research Section A-accelerators Spectrometers Detectors and Associated Equipment},
  year={2007},
  volume={572},
  pages={1022-1032}
}
  • S. ArutunianM.R.MailianK. Wittenburg
  • Published 21 March 2007
  • Physics
  • Nuclear Instruments & Methods in Physics Research Section A-accelerators Spectrometers Detectors and Associated Equipment

Vibrating wire monitor: Versatile instrumentation for particle and photon beam measurements with wide dynamic range

The vibrating wire monitor proposed herein is based on the strong dependence of the frequency of the pinched wire on its temperature. This dependence allows the measurement of a

Performance Studies of the Vibration Wire Monitor on the Test Stand with Low Energy Electron Beam

In the high intensity proton accelerator as the J-PARC accelerators, serious radiation and residual dose is induced by a small beam loss such a beam halo. Therefore, diagnostics of the beam halo

Effects of scanning speed on the laser beam profile measurements by vibrating wire

For measuring laser beam profiles, a vibrating wire monitor (VWM) has been introduced. The measurements were carried out at different speeds of scan. Preliminary estimates were made for the

Feasibility studies of a vibration wire monitor and a halo scraper in the J-PARC L3BT

In the Japan Proton Accelerator Research Complex (J-PARC) 3-GeV rapid cycle synchrotron (RCS), transverse beam halo diagnostics and scraping are required to increase the output beam power. Wire

An Electron Beam Profile Instrument Based on FBGs

Prove of concept of a new type of charged particle beam diagnostics based on FBGs was demonstrated and its operating principle relays on the measurement of the central wavelengths change of a matrix of FBG sensors as function of the temperature, following their exposure to an electron beam.

Electron beam profile instrument based on FBGs

The transversal profile of a charged particle beam, its position, its centroid location, its focus or flatness depends on the instrument operating conditions or on the beam exit set up. Prove of

Electron beams scanning: A novel method

Precise out-vacuum proton beam monitoring system based on vibrating wire

As an instrument for Korea Multi-purpose Accelerator Complex (KOMAC) facility proton beam profiling, a vibrating wire monitor (VWM) has been installed and tested at TR23 target room. Experiments were

Gas Flowmeter Based on Vibrating Wires

Abstract The paper proposes a new type of gas flowmeters based on measurements of the deformations of the thermal field of the heater in the presence of a flow using vibrating wires. The advantage of

References

SHOWING 1-10 OF 32 REFERENCES

Vibrating wire for beam profile scanning

A method that measures the transverse profile (emittance) of the bunch by detecting radiation arising at the scattering of the bunch on scanning wire is widely used. In this work information about

VIBRATING WIRES FENCE AS A NEGLIGIBLY DESTRUCTIVE BEAM PROFILE AND BEAM POSITION MONITOR

Vibrating wire can serve as an excellent thermometer of high resolution responding to particles and radiation beams. High resolution of the method is due to the fact, that the wire oscillations

Cavity mode related wire breaking of the SPS wire scanners and loss measurements of wire materials

During the SPS high intensity run 2002 with LHC type beam, the breaking of several of the carbon wires in the wire scanners has been observed in their parking position. The observation of large

FIRST EXPERIMENTAL RESULTS AND IMPROVEMENTS ON PROFILE MEASUREMENTS WITH THE VIBRATING WIRE SCANNER

The paper presents the first experimental results of transverse profile scans using a wire scanner based on a vibrating wire (vibrating wire scanner - VWS). The measurements were performed at the

Wire Scanners for Small Emittance Beam Measurement in Atf

The wire scanners are used for a measurement of the very small beam size and the emittance in Accelerator Test Facility (ATF). They are installed in the extraction beam line of ATF damping ring. The

Vibrating wire scanner: First experimental results on the injector beam of the Yerevan synchrotron

This paper presents the first experimental results of the transverse profile measurements using a vibrating wire scanner at the Yerevan synchrotron injector electron beam (6 nA after collimation).

Wire scanners in low energy accelerators

Vibrating wire scanner for beam profile monitoring

Method of beam transverse profile measurement in accelerators by scanning wire is wide-spread in accelerator technology. In this work vibrating wire is proposed to use as a scanning wire. In such way

VIBRATION WIRE MONITOR FOR PHOTON BEAMS DIAGNOSTICS: PRELIMINARY TESTS ON LASER BEAMS

Developed vibrating wire scanner showed high sensitivity to the charged particles beam intensity (electron, proton, ions). Since the mechanism of response of frequency shift due to the interaction

VIBRATING WIRE SCANNER/MONITOR FOR PHOTON BEAMS WITH WIDE RANGE OF SPECTRUM AND INTENSITY

Developed vibrating wire scanner showed high sensitivity to the charged particles beam intensity (electron, proton, ions). Since the mechanism of response of frequency shift due to the interaction