Vector control and fuzzy logic control of doubly fed variable speed drives with DSP implementation

  title={Vector control and fuzzy logic control of doubly fed variable speed drives with DSP implementation},
  author={Yifan Tang and Longya Xu},
  journal={IEEE Transactions on Energy Conversion},
  • Yifan TangLongya Xu
  • Published 1 December 1995
  • Engineering, Computer Science
  • IEEE Transactions on Energy Conversion
Field orientation control and fuzzy logic control are designed for variable speed drive systems with a doubly-fed machine in a slip power recovery configuration. Laboratory implementation with a general purpose DSP (digital signal processing) system is described and experimental results are given. High performance potential of a slip power recovery system is realized with these advanced controls, while flexible reactive power control becomes possible, and compared to the ordinary variable speed… 


In this paper a performances of torque tracking control for Doubly Fed Asynchronous Motor (DFAM) using PI and fuzzy logic controllers is proposed. First, a mathematical model of the doubly-fed


This study deals with the application of sliding mode control theory to wound rotor induction motor with its rotor fed by current sources in which the system operate in stator field oriented control.

Adaptive Fuzzy Logic Control : Application to the Stator Field Oriented Double-Fed Induction Motor Drive (DFIM)

This paper presents an application of indirect adaptive fuzzy logic control theory to the wound rotor asynchronous motor with both its stator and rotor fed by two PWM voltage source inverters in

Vector control of a diesel-driven doubly fed induction machine for a stand-alone variable speed energy system

This paper describes a control structure for a vector controlled doubly-fed induction generator, used for a variable speed energy conversion system, driven by a diesel engine. The paper focuses on an

Sensorless control of a doubly- fed induction generator for stand alone operation

This paper presents a sensorless vector control strategy for a stand-alone doubly-fed induction generator supplying energy to an isolated load. A model reference adaptive system, or MRAS, is used to

Fuzzy logic control of brushless doubly fed induction generator

This paper presents a new fuzzy logic control algorithm to improve the dynamic performance of the brushless doubly fed induction generator (BDFG). Also, an independent control of the active and

Fuzzy-based Active and Reactive Control for Brushless Doubly-fed Wind Power Generation System

The mathematical model for BDFM based on synchronous reference frame based on rotor d-q model is analyzed and a new type of power control system is designed by using the gap flux oriented vector transformation control technology.

A new control strategy by combining direct torque control with vector control for doubly fed machine

A new control strategy by combining vector control with direct torque control is proposed in this paper. The new method has the advantages of both vector control and direct torque control, such as

Fuzzy logic applications to high performance drives with special reference to reluctance motors

It is concluded that further research work is required in this area as VR drives are quite nonlinear electromagnetic structures and fuzzy and neuro-fuzzy control techniques are ideal solutions to control of reluctance drives.



Fuzzy logic application for intelligent control of a variable speed drive

Novel applications of fuzzy logic for the intelligent control of a slip power recovery system are presented and a direct fuzzy logic controller and an adaptive fuzzy controller, based on model reference adaptive control, are developed and simulated for the doubly-excited induction machine and power converter system.

Adaptive fuzzy control of a variable speed power generating system with doubly excited reluctance machine

  • Yifan TangLongya Xu
  • Engineering
    Proceedings of 1994 Power Electronics Specialist Conference - PESC'94
  • 1994
Fuzzy control methods are developed for a highly efficient variable speed constant frequency power generating system, with wind power generation as an example. In slip power recovery configuration,

Application of fuzzy logic in the speed control of AC servo system and an intelligent inverter

A fuzzy logic controller for use in the fully digital speed control of AC servomotor systems is presented. An intelligent inverter is also proposed to reduce the switching loss and the current

Active and reactive power control of doubly-fed wound rotor induction generator

A power control system for a doubly fed wound rotor induction generator has been developed. This power control system employs a control method using a rotating reference frame fixed on the gap flux

Stability analysis of a slip power recovery system under open loop and field orientation control

  • Yifan TangLongya Xu
  • Engineering
    Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting
  • 1993
The slip power recovery configuration provides an attractive alternative for variable speed drives and generating systems, due to its high-efficiency and low converter rating. The core component is

A flexible active and reactive power control strategy for a variable speed constant frequency generating system

  • Y. TangL. Xu
  • Engineering
    Proceedings of IEEE Power Electronics Specialist Conference - PESC '93
  • 1993
A flexible active and reactive power control strategy is developed, such that the optimal torque-speed profile of the turbine can be followed and overall reactive power can be controlled, while the machine copper loss has been minimized.

A novel wind-power generating system using field orientation controlled doubly-excited brushless reluctance machine

  • L. XuY. Tang
  • Engineering, Physics
    Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting
  • 1992
A novel variable-speed constant-frequency wind power generating system using a doubly-excited brushless reluctance machine is proposed. A field orientation control method is proposed to track the


ABSTRACT The paper describes a new type of variable speed doubly-fed reluctance machine and presents the model for the analysis of the machine. The stator of the machine is equipped with two sets of

Dynamic simulation of brushless doubly-fed machines

Dynamic and steady-state models for the simulation of the performance of experimental brushless doubly-fed machines (BDFM) are presented. The dynamic simulation results are obtained using a two-axis

Comparison study of rotor structures of doubly excited brushless reluctance machine by finite element analysis

Doubly excited brushless reluctance machine (DEBRM) has gained much attention in the area of variable-speed constant-frequency generating systems and adjustable speed drives. Two types of reluctance