• Corpus ID: 15151154

Use of PWM Techniques for Power Quality Improvement

@inproceedings{Patel2009UseOP,
  title={Use of PWM Techniques for Power Quality Improvement},
  author={Mahesh A. Patel and Ankit R. Patel and Dhaval R Vyas and Ketul Patel},
  year={2009}
}
This paper has discussed the effect of harmonics on the power quality of the power supply. The paper also discussed the different configurations of PWM techniques for harmonic reduction and improvement of fundamental peak voltage. In addition, a comprehensive comparison of all configurations is made in terms of THD, FFT and dominating harmonics components. This paper describes the results on the basis of MATLAB simulation. It is shown how, with suitable modifications. The conventional Regular… 

Figures and Tables from this paper

Power quality improvement using sinusoidal pulse width modulation(spwm)system

In this paper various power quality problems created by the widespread use of conventional diode bridge rectifiers and line-commutated AC/DC converters have been discussed. The state-of-the-art

Implementation of the PWM pre-calculated technique for elimination harmonic using microcontroller

  • Habib DallagiS. Bouzaiane
  • Engineering
    2017 International Conference on Advanced Systems and Electric Technologies (IC_ASET)
  • 2017
This paper deals with the problems of harmonic pollution generated by the DC-AC converters and its reduction techniques. The study is carried out on a single-phase pulse width modulation (PWM)

SPWM technique for reducing harmonics in three-phase non-linear load

This paper proposes a new pulse width modulation (PWM) technique to overcome the low performance of a conventional pulse width modulation control strategy for an active filter. In this design, the

A Simplified Method of Improving the Power Quality in Power Electronic Circuits using a Single Pair of IGBTs

A method to reduce harmonic components in voltage-sourced circuits utilizing IGBT switches and diodes using the PWM technique and also a technique to improve the power quality, using a single pair of IGBTs, developed in Simulink.

Power Quality Improvement and Analysis Using Multi-pulse Converter

Proposed AC–DC converter structure, consists of phase-shifting zigzag transformer overcomes the harmonic problem in AC mains and improves power quality with the help of the multi-pulse converter.

HARMONIC ANALYSIS BY SQUARE WAVE PWM TECHNIQUE AND SELECTED HARMONIC ELIMINATION IN INVERTER USING PARTICLE SWARM OPTIMIZATION

Converters are used in the utility interface of renewable energy system to reduce harmonic contents in line current/voltage and to increase reliability. These converters suffer from high level of

Harmonic Elimination System (HES) using a novel type of Pulse Width Modulation (PWM) scheme in Matlab-Simulink environment

The results shows the efficacy of the method developed for harmonic suppression, a Harmonic Elimination System using a novel type of PWM scheme, developed in the simulation environment.

Harmonic Reduction in Inverter with Different Techniques Including Fuzzy Logic Controller

In recent years, the growing and widespread use of power electronic equipments by totally different segment of society is perceptible. But, these equipments present itself as nonlinear impedances in

Hardware implementation of SPWM technique for an Inverter

This paper focuses on step by step development, simulation using MATLAB/ SIMULINK and also hardware implementation of SPWM pulses, which is possible only with a better gate pulses.

Modeling of PWM Inverters for Harmonic Reduction under Various Load Conditions using Fuzzy Controller

The results gained in this work prove the validity of the proposed controller of having an output voltage with minimum distortion and Fuzzy logic control mechanism is presented for the modifications in PWM inverter of the controllers’ structure.
...

References

SHOWING 1-8 OF 8 REFERENCES

A review of three PWM techniques

Three commonly used PWM techniques, sinusoidal P WM technique, space vector PWM technique and hysteresis (bang-bang) PWM Technique are discussed in this paper with emphasis on implementation.

Understanding Power System Hannonics

Harmonics – Past to Present Power systems are designed to operate at frequencies of 50 or 60Hz. However, certain types of loads produce currents and voltages with frequencies that are integer

Selective harmonic control: a general problem formulation and selected solutions

Selective harmonic elimination/control has been a widely researched alternative to traditional pulse-width modulation techniques. Previous and current work has made fundamental assumptions that

Application of IEEE STD 519-1992 Harmonic Limits

  • T. BloomingD. Carnovale
  • Engineering
    Conference Record of 2006 Annual Pulp and Paper Industry Technical Conference
  • 2006
The authors' views on some of the more ambiguous elements of IEEE Std 519-1992 and on the application of harmonic limits in general are presented.

Harmonics limits

  • 2006

Krein “Harmonic Control: A General Problem Formulation and Selected Solutions

  • IEEE Trans. On Power Electronics,
  • 2005

Modern Power Electronics and Drive System

  • Modern Power Electronics and Drive System

Application of IEEE STD 519-1992 Harmonics limits " Conf. record of the 2006 IEEE IAS pulp and paper conference

  • Application of IEEE STD 519-1992 Harmonics limits " Conf. record of the 2006 IEEE IAS pulp and paper conference