Understanding surface and sub-surface phenomena in nickel-based superalloy castings

@inproceedings{Appleton2017UnderstandingSA,
  title={Understanding surface and sub-surface phenomena in nickel-based superalloy castings},
  author={M. Appleton},
  year={2017}
}

Figures and Tables from this paper

References

SHOWING 1-10 OF 139 REFERENCES
The role of combustion synthesis in the formation of slurry aluminization
Abstract Slurry processes have been investigated for several years as an alternative technique to conventional CVD-derived aluminizing to achieve similar diffusion coatings. This study investigatesExpand
The Superalloys: Fundamentals and Applications
1. Introduction 2. The physical metallurgy of nickel and its alloys 3. Single crystal superalloys for blade applications 4. Superalloys for turbine disc applications 5. Environmental degradation: theExpand
Basic ceramic considerations for lost wax processing of high melting alloys
  • St. Fe Symp. Techform, PCC Struct. Inc
  • 2000
Secondary carbide precipitation in a directionally solified cobalt-base superalloy
A directionally solidified cobalt-base alloy, DZ40M, was solidified with a columnar grained austenitic matrix with a 〈001〉 preferential orientation and primary carbides of chromium-rich M7C3 and MCExpand
Discontinuous cellular precipitation in a high-refractory nickel-base superalloy
A discontinuous precipitation reaction has been investigated in a high-refractory content nickel-base alloy. The reaction transforms the two-phase γ-γ′ parent microstructure into a three-phaseExpand
A NEW TYPE OF MICROSTRUCTURAL INSTABILITY IN SUPERALLOYS - SRZ
A new type of instability in superalloys has been observed in advanced alloys containing high levels of refractory elements. One instability occurs under the diffusion zone of coatings and has beenExpand
Precipitation of chromium containing phases in aluminide coated nickel-base superalloy single crystals
The precipitation of chromium-containing phases, in both the B2 type β-phase coating matrix (nominally NiAl) and the substrate of high-activity-pack-aluminized single crystals of a nickel-baseExpand
Role of platinum in aluminide coatings
Abstract An investigation has been carried out to determine the role of platinum in aluminide coatings on selected nickel-based superalloys. Various microscopy, spectroscopy and diffractionExpand
Relative stability of carbides and their effects on the properties of K465 superalloy
Thermal exposure specimens of K465 superalloy are carried out at 850, 950, 1000, 1050 and 1100 degrees C in order to investigate the stability of carbides. MC carbide is stable from 850 to 950Expand
...
1
2
3
4
5
...