TrueEBSD: Correcting spatial distortions in electron backscatter diffraction maps.

@article{Tong2020TrueEBSDCS,
  title={TrueEBSD: Correcting spatial distortions in electron backscatter diffraction maps.},
  author={Vivian S. Tong and T. Ben Britton},
  journal={Ultramicroscopy},
  year={2020},
  volume={221},
  pages={
          113130
        }
}

Figures from this paper

Understanding plasticity in zirconium using in-situ measurement of lattice rotations

Understanding deformation in polycrystalline metals is critical to use them in high-value high-risk applications. We present in-situ characterisation of plastic deformation of zirconium, a hexagonal

Early Martensitic Transformation in a 0.74C–1.15Mn–1.08Cr High Carbon Steel

The martensitic transformation in a high carbon steel was studied by a new experimental approach focusing on the nucleation and growth as well as the variant pairing of the early-formed martensite. A

Redistribution of Grain Boundary Misorientation and Residual Stresses of Thermomechanically Simulated Welding in an Intercritically Reheated Coarse Grained Heat Affected Zone

A study of the migration of the grain boundary misorientation and its relationship with the residual stresses through time immediately after the completion of a thermomechanical simulation has been

References

SHOWING 1-10 OF 32 REFERENCES

Space rocks and optimising scanning electron channelling contrast

Geometrically caused image distortion effects and their influence on interpretation of EBSD measurements

Abstract The imaging of high tilted flat sample surfaces in scanning electron microscopy has some special characteristics. A typical example is the trapezium distortion which is only detectable at

Rapid electron backscatter diffraction mapping: Painting by numbers

Image distortions in SEM and their influences on EBSD measurements.

  • G. Nolze
  • Materials Science
    Ultramicroscopy
  • 2007

A method to correct coordinate distortion in EBSD maps

Distortion Correction Protocol for Digital Image Correlation after Scanning Electron Microscopy: Emphasis on Long Duration and Ex-Situ Experiments

Recently, scanning electron microscopy (SEM) has been used for digital image correlation (DIC), as micrographs can be acquired with high magnification, providing improved resolution to quantify

Estimations of bulk geometrically necessary dislocation density using high resolution EBSD.

On the alignment of 3D EBSD data collected by serial sectioning technique

  • H. Pirgazi
  • Materials Science
    Materials Characterization
  • 2019