Triple-shelled NiMn2O4 hollow spheres as an efficient catalyst for low-temperature selective catalytic reduction of NOx with NH3.

@article{Han2018TripleshelledNH,
  title={Triple-shelled NiMn2O4 hollow spheres as an efficient catalyst for low-temperature selective catalytic reduction of NOx with NH3.},
  author={Yanling Han and Jincheng Mu and Xinyong Li and Jinsuo Gao and Shiying Fan and Feng Tan and Qidong Zhao},
  journal={Chemical communications},
  year={2018},
  volume={54 70},
  pages={
          9797-9800
        }
}
Unique triple-shelled NiMn2O4 hollow spheres are fabricated by a facile solvothermal method. Owing to its particular triple shell structure, the as prepared NiMn2O4 catalyst exhibits superior low-temperature NH3-SCR catalytic performance, achieving above 90% NOx conversion in the temperature range from 100 °C to 225 °C. 
Green synthesis of mesoporous MnNbOx oxide by a liquid induced self-assembly strategy for low-temperature removal of NOx.
Herein, we present a facile, sustainable, and highly efficient ionic liquid induced self-assembly protocol to construct a highly porous MnNbOx oxide with exceptionally high catalytic activity for NOx
Mechanistic Aspects of Highly Efficient FeaSbTiOx Catalysts for the NH3-SCR Reaction: Insight into the Synergistic Effect of Fe and S Species
A series of highly efficient, environmentally friendly, and low-cost FeaSbTiOx catalysts were prepared by a simple thermal hydrolysis method for the NH3-selective catalytic reduction (SCR) reaction...
Ultralow loading of nanostructured Mn species onto two-dimensional Co3O4 nanosheets for selective catalytic reduction of NOx with NH3
We report a facile method for dispersing Mn species onto two-dimensional Co3O4 nanosheets at the nanoscale for the selective catalytic reduction (SCR) of NOx with NH3. In comparison with the
Tunable preparation of highly dispersed NixMn-LDO catalysts derived from NixMn-LDHs precursors and application in low-temperature NH3-SCR reactions
The NixMn-LDO catalysts derived from NixMn-LDHs precursors with uniform distribution of active species particles exhibited outstanding DeNOx performance.
FeSTi Superacid Catalyst for NH3-SCR with Superior Resistance to Metal Poisons in Flue Gas
At present, commercial V2O5–WO3(MoO3)/TiO2 catalyst for selective catalytic reduction with NH3 (NH3-SCR) shows poor resistance to alkali, alkaline-earth, and heavy metals that are normally containe...
Significant promotion effect of the rutile phase on V2O5/TiO2 catalysts for NH3-SCR.
A large amount of polymeric vanadyl species owing to higher interaction energy between vanadia and anatase than rutile and the synergistic effect of vanadium oxides, anatase and rutile TiO2
Manganese-Based Spinel Core–Shell Nanostructures for Efficient Electrocatalysis of 1,2-Dichloroethane
Electrocatalytic dechlorination continually attracts attention in dealing with chlorinated volatile organic compounds (CVOCs) due to its mild reaction conditions, economical, and environmental frie...
Facile construction of hierarchical ellipsoid-shaped TiO2 porous nanostructures with enhanced photocatalytic activity
Hierarchical ellipsoid-shaped TiO2 porous nanostructures with efficient photocatalytic activity for the degradation of MB are constructed by hierarchical assembly of TiO2 nanoparticles.
...
1
2
3
...

References

SHOWING 1-10 OF 38 REFERENCES
Self-templated synthesis of uniform nanoporous CuCo2O4 double-shelled hollow microspheres for high-performance asymmetric supercapacitors.
TLDR
Electrochemical results in three- and two-electrode systems show that the double-shelled hollow microsphere electrode is a promising candidate for high-performance supercapacitors.
Self-templated formation of ZnFe2O4 double-shelled hollow microspheres for photocatalytic degradation of gaseous o-dichlorobenzene
In this work, double-shelled ZnFe2O4 hollow microspheres were fabricated by a facile self-templated solvothermal method and the interiors could be precisely modulated by varying the reaction rate
Low-Temperature Selective Catalytic Reduction (SCR) of NO with NH3 by Using Mn, Cr, and Cu Oxides Supported on Hombikat TiO2.
A Highly active, time stable, and water resistant, Hombikat TiO2 supported Mn catalyst has been developed for the selective reduction of NO by NH3 [Eq. (1)]. The analogous Cu and Cr supported
Facile preparation of MnO2 doped Fe2O3 hollow nanofibers for low temperature SCR of NO with NH3
A series of MnO2 doped Fe2O3 hollow nanofibers with different Mn/Fe molar ratios were successfully synthesized by the electrospinning method for the low temperature selective catalytic reduction
Low temperature selective catalytic reduction (SCR) of NO with NH3 over Fe-Mn based catalysts.
TLDR
Fe-Mn based transition metal oxides show nearly 100% NO conversion at 100-180 degrees C for selective catalytic reduction of NO with NH3 under the applied conditions with a space velocity of 15,000 h-1.
Rational Design of High-Performance DeNOx Catalysts Based on MnxCo3–xO4 Nanocages Derived from Metal–Organic Frameworks
Herein, we have rationally designed and originally developed a high-performance deNOx catalyst based on hollow porous MnxCo3–xO4 nanocages with a spinel structure thermally derived from nanocube-like
Rational design and in situ fabrication of MnO2@NiCo2O4 nanowire arrays on Ni foam as high-performance monolith de-NOx catalysts
In this work, we have rationally designed and originally developed a novel monolith de-NOx catalyst with nickel foam as the carrier and three dimensional hierarchical MnO2@NiCo2O4 core–shell nanowire
...
1
2
3
4
...