Corpus ID: 2255775

Trends in the Development of Machinery and Associated Technology ” TMT 2007 , Hammamet , Tunisia , 05-09 September , 2007 . AUTOMATIC TOOL SELECTION AND FEEDRATE ADAPTATION FOR ROUGHING SCULPTURED

@inproceedings{Aguenini2007TrendsIT,
  title={Trends in the Development of Machinery and Associated Technology ” TMT 2007 , Hammamet , Tunisia , 05-09 September , 2007 . AUTOMATIC TOOL SELECTION AND FEEDRATE ADAPTATION FOR ROUGHING SCULPTURED},
  author={Brahim Aguenini and Hamza Messaoudi and Djamel Chabane},
  year={2007}
}
Sculptured surfaces used in the design and manufacture of molds, dies are machined on 3 or 5-axis milling machines. Generally, the final part is obtained in three stages: roughing, semiroughing and finishing. In the roughing stage, the goal is to remove the most material from the initial workpiece as rapidly as possible by using generally a large flat end mill tool. In the classical approach, the NC part programmer, based on his experience, chooses the number of tools with their dimensions and… Expand

Figures from this paper

References

SHOWING 1-10 OF 12 REFERENCES
Interference detection and optimal tool selection in 3-axis NC machining of free-form surfaces
TLDR
A systematic tool-path generation methodology which incorporates interference detection and optimal tool selection for machining free-form surfaces on 3-axis CNC machines using ball-end cutters is presented. Expand
On-Line Optimization of Cutting Conditions for NC Machining
This paper discusses a number of discrete models used for optimization of cutting condition during NC machining. The models can be broadly placed into two categories: 1. volumetric models in whichExpand
Tool-path generation for Z-constant contour machining
  • Sang C. Park
  • Engineering, Computer Science
  • Comput. Aided Des.
  • 2003
TLDR
The tool-path linking problem becomes a touring problem so that every node has been traversed and a data structure, called a TPE-net, is developed, providing information on the machining constraints among the tool- path-elements. Expand
Determining gouge-free ball-end mills for 3D surface machining from point cloud data
Abstract This paper presents an algorithm to automatically determine the optimal size of the ball-end milling tool used for the three-axis finish machining of free-form surfaces directly fromExpand
Ball-end cutter interference avoidance in NC machining of sculptured surfaces
Abstract Cutter interference (or part surface gouging) is one of the most critical problems in NC machining of sculptured surfaces. Presented in this paper is an algorithmic procedure that convertsExpand
An Internet-Based Virtual CNC Milling System
This paper addresses the importance of integrating a virtual Manufacturing (VM) system with the Internet and proposes a web-based, scalable and distributed architecture for developing aExpand
Usinage de formes gauche : contribution à l'amélioration de la qualité des trajectoires d'usinage
Les travaux presentes dans ce memoire ont pour cadre l'usinage des formes gauches. Le processus de realisation est base sur la cfao et sur l'usinage a grande vitesse. Nos travaux ont pour butExpand
OpenGL programming guide, Addisson-Wesley
  • Publishing Company,
  • 1997
Hemmett.: Integration of Geometric and Mechanistic Models of NC Machining into an Open-Architecture Machine Tool Controller
  • ASME International Mechanical Engineering Congress and Exposition,
  • 2000
Integration of Geometric and Mechanistic Models of NC Machining into an Open-Architecture Machine Tool Controller
  • ASME International Mechanical Engineering Congress and Exposition
  • 2000
...
1
2
...