Tool Condition Monitoring in Turning Using Statistical Parameters of Vibration Signal

@inproceedings{Arslan2016ToolCM,
  title={Tool Condition Monitoring in Turning Using Statistical Parameters of Vibration Signal},
  author={Hakan Arslan and Ali Osman Er and Sadettin Orhan and Ersan Aslan},
  year={2016}
}
In this study, the relationship between vibration and tool wear is investigated during high-speed dry turning by using statistical parameters. It is aimed to show how tool wear and the work piece surface roughness changes with tool vibration signals. For this purpose, a series of experiments were conducted in a CNC lathe. An indexable CBN tool and a 16MnCr5 tool steel that was hardened to 63 HRC were both used as material twins in the experiments. The vibration was measured only in the… CONTINUE READING

References

Publications referenced by this paper.
SHOWING 1-10 OF 32 REFERENCES

Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process

A K., U. S. Risbood, Dixit, D A., Sahasrabudhe
  • J. Mater. Process. Technol.,
  • 2003

Sahasrabudhe , Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process

U. S. Risbood
  • J . Mater . Process . Technol .
  • 2003

Dimla. The correlation of vibration signal features to cutting tool wear in a metal turning operation

D E.
  • Int J AdvManuf Tech.,
  • 2002

The correlation of vibration signal features to cutting tool wear in a metal turning operation

Thomas, Y.
  • Int J AdvManuf Tech .
  • 2002