Corpus ID: 10748769

Title Dynamic modeling and experimental investigation of a high temperature PEM fuel cell

@inproceedings{Nguyen2016TitleDM,
  title={Title Dynamic modeling and experimental investigation of a high temperature PEM fuel cell},
  author={Gia Luong Huu Nguyen and Simon Lennart Sahlin and S{\o}ren Juhl Andreasen and Brendan Shaffer and Jack Brouwer},
  year={2016}
}
High temperature polymer fuel cells operating at 100 to 200C require simple fuel processing and produce high quality heat that can integrate well with domestic heating systems. Because the transportation of hydrogen is challenging, an alternative option is to reform natural gas on site. This article presents the development of a dynamic model and the comparison with experimental data from a high temperature proton exchange membrane fuel cell stack operating on hydrogen with carbon monoxide… Expand

References

SHOWING 1-10 OF 33 REFERENCES
Dynamic Model of the High Temperature Proton Exchange Membrane Fuel Cell Stack Temperature
The present work involves the development of a model for predicting the dynamic temperature of a high temperature proton exchange membrane (HTPEM) fuel cell stack. The model is developed to testExpand
Dynamic modeling of a high-temperature proton exchange membrane fuel cell with a fuel processor
Abstract A dynamic model of a high-temperature proton exchange membrane fuel cell with a fuel processor is developed in this study. In the model, a fuel processing system, a fuel cell stack, and anExpand
Experimental Performance Evaluation of a High Temperature PEM Fuel Cell at Different Temperatures and Pressures
The high temperature proton exchange membranes (HT-PEM) attract growing interests due to its enhanced electrochemical kinetics, simplified pinch technology and utilization of higher CO-rich reformedExpand
Thermal modeling and temperature control of a PEM fuel cell system for forklift applications
Temperature changes in PEM fuel cell stacks are considerably higher during load variations and have a negative impact as they generate thermal stresses and stack degradation. Cell hydration is alsoExpand
Modelling and evaluation of heating strategies for high temperature polymer electrolyte membrane fuel cell stacks
Experiments were conducted on two different cathode air cooled high temperature PEM (HTPEM) fuel cell stacks; a 30 cell 400 W prototype stack using two bipolar plates per cell, and a 65 cell 1 kWExpand
Transient response of high temperature PEM fuel cell
A transient three-dimensional, single-phase and non-isothermal numerical model of polymer electrolyte membrane (PEM) fuel cell with high operating temperature has been developed and implemented inExpand
Thermal management strategies for a 1 kWe stack of a high temperature proton exchange membrane fuel cell
A proper thermal management strategy is needed to maintain uniform temperature distribution and derive optimal performance in high temperature proton exchange membrane fuel cells (HT-PEMFC). InExpand
Three-Dimensional Modeling and Experimental Study of a High Temperature PBI-Based PEM Fuel Cell
This paper investigates the performance of a high temperature proton exchange membrane (PEM) fuel cell. Both experimental work and numerical simulation are conducted. The high temperature protonExpand
Design and optimization of a proton exchange membrane fuel cell CHP system for residential use
Abstract This work deals with the analysis of a micro-cogeneration system for residential use based on a 1 kWe proton exchange membrane (PEM) fuel cell. A detailed system analysis of the fuel cellExpand
Quasi-three dimensional dynamic model of a proton exchange membrane fuel cell for system and controls development
Abstract A first principles dynamic model of the physical, chemical, and electrochemical processes at work in a proton exchange membrane fuel cell has been developed. The model solves the dynamicExpand
...
1
2
3
4
...