Thermal hydraulic simulations of a PWR nuclear power plant

@inproceedings{Ibrahim2019ThermalHS,
  title={Thermal hydraulic simulations of a PWR nuclear power plant},
  author={S. Ibrahim and Sami Ibrahim Atia},
  year={2019}
}
This research presents simulation analyses of steady state, station blackout, and loss of coolant accident thermal hydraulic conditions. The plant is a PWR type with output of about 1000 MWe. The simulations are performed by using RELAP and PCTran codes to develop a model of this PWR which could simulate its primary system, with good accuracy in cases of steady state, station blackout, and loss of coolant accidents. The modelled core temperature distribution, pressure, coolant mass flow inlet… Expand

References

SHOWING 1-10 OF 12 REFERENCES
Station Blackout and Nuclear Safety
DEVELOPMENT OF RELAP5 NODALIZATION FOR IRIS NON-LOCA TRANSIENT ANALYSES
Flow regimes and heat transfer modes identification in Angra 2 core, during small break in the primary loop with area
  • 2015
Flow regimes and heat transfer modes identification in Angra 2 core, during small break in the primary loop with area of 100 cm 2 , simulated with RELAP5 code
  • International Nuclear Atlantic Conference -INAC 2015, 4-9 October
  • 2015
Westinghouse pressurized water reactor nuclear power plant, Water Reactor Divisions
  • Westinghouse Electric Corporation
  • 2005
Development of a RELAP5 Nodalization for IRIS Non-LOCA Transient Analyses’, Nuclear Mathematical and Computational Sciences: A Century
  • 2003
...
1
2
...