• Corpus ID: 15697150

Thermal Analysis of Piston for the Influence on Secondary motion

@inproceedings{Qian2013ThermalAO,
  title={Thermal Analysis of Piston for the Influence on Secondary motion},
  author={Zuoqin Qian and Honghai Liu and Guang-de and Zhang and David and J. and Brown and George C. Mavropoulos},
  year={2013}
}
The gas force due to the combustion in the cylinder of an IC engine will cause the piston to move with primary motion and secondary motion. The primary motion of the piston from TDC to BDC is linear in nature. This motion is desired for translation of motion of engine components. Secondary motion is due to the transverse motion of the piston while piston moving from TDC to BDC and vice-versa. The secondary motion of the piston is considered as the main source for the piston slap, which in turn… 

Figures and Tables from this paper

Analysis of Piston of two Stroke Engine

Due to the inherent nature of combustion in the Cylinder of a Conventional Internal combustion engine, stress variation as well as a certain temperature distribution sets up in the entire piston.

Thermal Stress Analysis of a Speculative IC Engine Piston using CAE Tools

This paper deals with the pressure due to expanding combustion gases in the combustion chamber space at the top of the cylinder which generate thermal stresses due to presence of heat involved on the

Comparison of carbon graphite piston with other materials by using finite element analysis method where temperature applied on the top of piston head.

Abstract: This paper describes the stress distribution, displacement and Strain of aluminum alloy 2618, Aluminum Alloy 4032 and carbon graphite pistons by using finite element Analysis (FEA) .The

INVESTIGATION ON TEMPERATURE PROFILES OF PISTON USING LOW COST BURNER RIG

Engines like a compressed natural gas with direct injection system (CNGDI) and diesel engine (heavy duty and marine transportation) have a tendency to produce extreme temperature level which may lead

TOPOLOGY OPTIMIZATION OF INTEGRATED COMBUSTION ENGINE PISTON USING FEA METHOD (CAE TOOLS)

This thesis work correlated to the lay out optimization of internal combustion engine piston by analyzing the Computer Aided Designing model initially created by CATIA, then Finite Element Analysis done by ANSYS.

IPASJ International Journal of Mechanical Engineering (IIJME)

This paper gives a brief review on various techniques used for analysing the faults of gearbox based on vibration analysis method with small insight on new approach used for diagnosis of gear box such as Artificial Neural Network, fuzzy sets and some emerging technology in gear fault analysis.

Review on Analysis and Optimization of Piston of IC Engine

FEA is used in this research to describe the stress distribution of a seizure on a piston four stroke engine. Computer-aided design (CAD) software is used to do the finite element analysis. The major

ANALYSIS OF PISTON OF TWO STROKE ENGINE

Due to the inherent nature of combustion in the Cylinder of a Conventional Internal combustion engine, stress variation as well as a certain temperature distribution sets up in the entire piston.

References

SHOWING 1-10 OF 15 REFERENCES

New Three-dimensional Piston Secondary Motion Analysis Method Coupling Structure Analysis and Multi Body Dynamics Analysis

A new piston secondary motion analysis has been developed that accurately predicts piston strength and the slap noise that occurs when the engine is running. For this secondary motion analysis,

Thermal Effects on Diesel Engine Piston and Piston Compression Rings

This paper introduces an analytical study on the thermal effects on the diesel engine piston and its compresion rings during the contact between the piston and its compression rings .A three

Determination of Piston and Cylinder Head Temperature Distribution in a 4-Cylinder Gasoline Engine at Actual Process

Piston and cylinder head temperature has considerable influence on efficiency, emission, and performance of the SI (Spark Ignition) engine. Purpose of this investigation is measurement of piston

The influence of the engine load on value and temperature distribution in the piston of the turbocharged Diesel engine

Purpose: The determination of the temperature distribution in the piston in initial phase of the work of the turbocharged Diesel engine. Design/methodology/approach: The results of calculations of

Temperature Field Estimation for the Pistons of Diesel Engine 4112

An approach to estimating the temperature field of the pistons of Diesel Engines 4112 using the combination of experimental measurement and finite element analysis (FEA), which provides effective theoretical evidence for further improving the Pistons' performance.

High-temperature dynamic deformation of aluminum alloys using SHPB

This paper investigates the dynamic deformation behavior of two aluminum alloys, 2024-T4 and 6061-T6, using a modified split Hopkinson pressure bar (SHPB) with a pulse shaper technique at both

Internal Combustion Engines: Applied Thermosciences

aeo Introduction to Internal Combustion Engines aeo Gas Cycles aeo Fuel, Air and Combustion Thermodynamics aeo Fuel--Air Cycles aeo Engine Testing and Control aeo Friction aeo Air, Fuel and Exhaust

Engineering Thermodynamics

Engineering ThermodynamicsWork and Heat Transfer. By G. F. C. Rogers and Y. R. Mayhew. Pp. x + 619. (London: Longmans, Green and Co., Ltd., 1957.) 50s. net.