Corpus ID: 18953010

Theoretical and Experimental Modal Analysis of Multiple Flexible Disk-Flexible Shaft System

@inproceedings{Khader2007TheoreticalAE,
  title={Theoretical and Experimental Modal Analysis of Multiple Flexible Disk-Flexible Shaft System},
  author={N. Khader and Ali Atoum and A. Al-Qaisia},
  year={2007}
}
The presented paper describes the results of an experimental study, carried out to determine the natural frequencies of a flexible shaft with several flexible disks. A single input single output approach was adopted to build the Frequency Response Function, with an impact hammer and a piezoelectric accelerometer used to excite the system and to record its response, respectively. The experimental results are compared with the corresponding results, obtained from a theoretical study, based on the… Expand

Figures and Tables from this paper

Dynamic response of a Pelton turbine shaft under the impact of water jet
Article info: Type: Research Abstract The performance and reliability of any rotating machine can be studied by proper dynamic analysis of the machine. This paper presents a method to study theExpand
Dynamic response of a shaft of a Pelton turbine due to impact of water jet
Performance and reliability of any rotating machine can be studied by proper dynamic analysis of the machine. In this regard, this paper presents the method to study the dynamic response of the shaftExpand
Modal parameters of a rotating multiple-disk-shaft system from simulated frequency response data
Modal parameters of a rotating multiple disk-shaft system are estimated in Multiple Input/Multiple Output (MIMO) scheme. The response at multiple output degrees of freedom (dofs) and excitations atExpand

References

SHOWING 1-10 OF 17 REFERENCES
TUNING OF SIMULATED NATURAL FREQUENCIES FOR A FLEXIBLE SHAFT–MULTIPLE FLEXIBLE DISK SYSTEM
Abstract The vibration of a flexible shaft coupled with multiple flexible disks is investigated by using a substructure synthesis technique with the assumed modes methods to be compared withExpand
Vibration Analysis of a Rotor With Multiple Flexible Disks Using Assumed Modes Method
An assumed modes method is developed to investigate the effect of multiple flexible disks on the vibrational modes of flexible rotor system. The analysis rotor model consists of multiple disks on aExpand
EVALUATION OF THE LONGITUDINAL COUPLED VIBRATIONS IN ROTATING, FLEXIBLE DISKS/SPINDLE SYSTEMS
The natural frequencies and modes of the longitudinal coupled vibrations in a flexible shaft with multiple flexible disks are determined through a substructure synthesis technique. The analysis rotorExpand
FREE VIBRATION ANALYSIS OF A SPINNING FLEXIBLE DISK–SPINDLE SYSTEM SUPPORTED BY BALL BEARING AND FLEXIBLE SHAFT USING THE FINITE ELEMENT METHOD AND SUBSTRUCTURE SYNTHESIS
Abstract Free vibration of a spinning flexible disk–spindle system supported by ball bearing and flexible shaft is analyzed by using Hamilton's principle, FEM and substructure synthesis. The spinningExpand
Vibration of mistuned bladed disks supported by flexible continuous shafts
Abstract A simple structural model is presented to investigate the effect of blade mistuning on the dynamic characteristics of a non-rotating flexible blade-rigid disk-flexible shaft assembly, whichExpand
Shaft flexibility effects on the forced response of a bladed-disk assembly
Abstract A modal analysis approach is used to study the forced response of an actual flexible bladed-disk-shaft system. Both in-plane and out-of-plane flexible deformations of the bladed-diskExpand
Structural dynamics of rotating bladed-disk assemblies coupled with flexible shaft motions
In order to analyze the dynamic behavior of the first stage compressor/fan of the 'E3' turbofan engine, a classical structural dynamics approach is employed to couple the motions of a flexible bladedExpand
VIBRATION ANALYSIS OF SHAFT-BLADED DISK SYSTEM BY USING SUBSTRUCTURE SYNTHESIS AND ASSUMED MODES METHOD
Abstract An analytical substructure synthesis and assumed modes method is developed to investigate the effect of the flexibility of a bladed disk assembly on the vibrational mode of a flexible rotorExpand
Vibration of rotating disk/spindle systems with flexible housing/stator assemblies
The subject of study in this paper is a rotating spindle carrying multiple flexible disks mounted on a flexible housing/stator assembly through ball bearings or hydrodynamic bearings. TheExpand
A Nonclassical Vibration Analysis of a Multiple Rotating Disk and Spindle Assembly
This paper studies natural frequencies and mode shapes of a spinning disk/spindle assembly consisting of multiple elastic circular plates mounted on a rigid spindle that undergoes infinitesimalExpand
...
1
2
...