The role of synthetic and natural fillers on three‐body abrasive wear behaviour of glass fabric–epoxy hybrid composites

@article{Mohan2012TheRO,
  title={The role of synthetic and natural fillers on three‐body abrasive wear behaviour of glass fabric–epoxy hybrid composites},
  author={N. Mohan and S. Natarajan and S. P. Kumareshbabu},
  journal={Journal of Applied Polymer Science},
  year={2012},
  volume={124},
  pages={484-494}
}
Polymer matrix composites are a promising candidate in tribological applications due to possibility of tailoring their properties with special fillers. The comparative performance of Glass–Epoxy (G-E) composites with influence of synthetic fillers such as graphite (Gr) and silicon carbide (SiC) and biobased natural filler jatropha oil cake (JOC) was experimentally investigated. All the composites were fabricated using vacuum-assisted resin infusion (VARI) technique. The mechanical properties… Expand
Three-Body Abrasive Wear Behavior of Needle-Punch Nonwoven Jute Fiber Reinforced Epoxy Composites
Abstract Now-a-days, natural fiber based composites are emerging as a supplement to the synthetic fiber composites. The aim of the present work is to investigate the three-body abrasive wear behaviorExpand
Investigation on Tribological Behaviour of Bio-Based Pongamia Pinnata Seed Cake Waste Incorporated Basalt Epoxy Composites
Abstract The incorporation of fillers/fibers into polymer composites gives a good combination of mechanical properties, chemical resistance, damping vibration coupled with tribological propertiesExpand
Three-body abrasive wear behavior of short jute fiber reinforced epoxy composites
In present investigation, the three-body abrasive wear behavior of short jute fiber reinforced epoxy composites was studied. The effect of various parameters such as fiber loading, sliding velocity,Expand
A review on mechanical and wear properties of fiber-reinforced thermoset composites with ceramic and lubricating fillers
Abstract The need for exploring the mechanical and wear behavior of thermoset polymers and their composites is found to be ever-increasing, owing to their usage in an enormous number of engineeringExpand
Physical, mechanical and abrasive wear behaviour of jute fiber reinforced polymer composites
Now-a-days, abrasive wear of engineering and agricultural machine components caused by the abrasive particles is a major industrial problem. Therefore, a full understanding of the effects of allExpand
Study on thermal and erosive wear behaviour of hard powders filled glass-epoxy composite
Abstract The effect of hybrid powder fillers (WC + Ta/NbC) on thermal response and erosion wear resistance of woven glass fiber reinforced-epoxy composites has been studied. Vacuum assisted resinExpand
Parametric Optimization and Prediction of Abrasion Wear Behavior of Marble-Particle-Filled Glass–Epoxy Composites Using Taguchi Design Integrated with Neural Network
  • Subhrajit Ray
  • Materials Science
  • 2021
Glass fiber composites are emerging as alternatives to conventional materials. The aim of the present research is to investigate the three-body abrasion wear behavior of marble-powder-filledExpand
Effect of load parameter on tribological behavior of UHMWPE/Pongamia oil-cake incorporated basalt epoxy composites
Abstract The wear nature of basalt epoxy specimens incorporated with both POC and UHMWPE was studied by using wear test tribometer. The wear rate was calculated with respect to applied load. The testExpand
Epoxy resin filled with primary and secondary raw material - useable in agriculture
Valasek P., Kejval J., Muller M., 2014. Epoxy resin filled with primary and secondary raw material – useable in agriculture . Res. Agr. Eng., 60: 165–171. Hard inorganic particles in the interactionExpand
Abrasion of Polymeric Composites on Basis of Machining Splinters from Hardfacing Alloys – Usable in Agrocomplex
VALASEK PETR, MULLER MIROSLAV. 2014. Abrasion of Polymeric Composites on Basis of Machining Splinters from Hardfacing Alloys – Usable in Agrocomplex. Acta Universitatis Agriculturae et SilviculturaeExpand
...
1
2
3
...

References

SHOWING 1-10 OF 24 REFERENCES
Mechanical and Abrasive Wear Studies on Biobased Jatropha Oil Cake Incorporated Glass–Epoxy Composites
An investigation was made to evaluate the effect of the incorporation of jatropha oil cake (JOC) alone and in combination with silicon carbide (SiC) on the mechanical and tribological wear behaviourExpand
Three-body abrasive wear behavior of E-glass fabric reinforced/graphite-filled epoxy composites
The present article summarizes an experimental study on three-body abrasive wear behavior of glass fabric reinforced/graphite particulate-filled epoxy composites. The wear behavior was assessed byExpand
Tribological behavior of hybrid glass/PTFE fabric composites with phenolic resin binder and nano-TiO2 filler
Abstract The unfilled and nano-TiO 2 filled hybrid glass/PTFE fabric composites were prepared by dip coating of the hybrid glass/PTFE fabric in a phenolic resin containing the nano-TiO 2 to beExpand
Mechanical and tribological properties of glass–epoxy composites with and without graphite particulate filler
The objectives of this research article is to evaluate the mechanical and tribological properties of glass-fiber-reinforced epoxy (G–E) composites with and without graphite particulate filler. TheExpand
Mechanical and Abrasive Wear Behavior of Coleus Spent Filled Unsaturated Polyester/Polymethyl Methacrylate Semi Interpenetrating Polymer Network Composites
Mechanical properties and three-body abrasive wear behavior of 5 and 10% w/w bio-based coleus spent (CS) filled and unfilled semi interpenetrating polymer network composites of unsaturatedExpand
Three-body abrasive wear behaviour of polyaryletherketone composites
Abstract An experimental investigation was carried out to study the effect of reinforcement fibres, solid lubricants, mass of abrasives and load in three-body abrasive wear situations on variousExpand
Influence of orientation and volume fraction of Aramid fabric on abrasive wear performance of polyethersulfone composites
Abstract In case of fabric reinforced composites of specialty polymers influence of orientation of fabric and its volume fraction on tribo-behaviour is sparingly studied. In our earlier work, we haveExpand
Tribological and mechanical properties of Nomex fabric composites filled with polyfluo 150 wax and nano-SiO2
Abstract Nomex fabric composites filled with the particulates of polyfluo150 wax (PFW) and nanoparticles of SiO 2 , respectively, were prepared by dip-coating of Nomex fabric in a phenolic resinExpand
Mechanical and tribological properties of carbon fabric composites filled with several nano-particulates
Abstract The carbon fabric composites filled with the particulates of nano-SiO 2 , nano-TiO 2 , and nano-CaCO 3 , respectively, were prepared by dip-coating of the carbon fabric in a phenolic resinExpand
Three-body abrasive wear of short glass fibre polyester composite
Abstract Short E-glass fibre-reinforced polyester composites with and without filler have been studied for the low stress abrasive wear behaviour carried out using Rubber Wheel Abrasion Test (RWAT)Expand
...
1
2
3
...