The power supply for a medical synchrotron Beam Chopper System

@article{Dallago2008ThePS,
  title={The power supply for a medical synchrotron Beam Chopper System},
  author={Enrico Dallago and Giuseppe Venchi and Steven Rossi and Marco G. Pullia and T. Kenneth Fowler and Ulla Juul Nielsen},
  journal={2008 34th Annual Conference of IEEE Industrial Electronics},
  year={2008},
  pages={1016-1020}
}
In this paper the power supply for the Beam Chopper System of a medical synchrotron is presented. The four, series connected beam chopper magnets, which are placed on the extraction line, are used for blanking the beam both during routine operation and for emergency. To let the beam pass the magnets need to be energized with a current, proportional to the beam energy, whose maximum value is 650 A. Rise and fall time shall be less than 260 mus, while the flat-top can be maintained for an… CONTINUE READING
6 Citations
5 References
Similar Papers

References

Publications referenced by this paper.
Showing 1-5 of 5 references

Crescenti: “The Design of the Special Magnets for PIMM/TERA

  • L. Sermeus, J. Borburgh, A. Fowler, M. Hourican, M.K.-D. Metzmacher
  • Proceedings of the ninth European Particle…
  • 2004
Highly Influential
6 Excerpts

Venchi: "The power supply for the beam chopper magnets of a medical synchrotron

  • E. Dallago, T. Fowler, M. B. Larsen, M. Pullia, G. S. Rossi
  • IEEE Power Electronics Specialists Conference
  • 2006
2 Excerpts

The Principles of Circular Accelerators and Storage Rings

  • P. J. Bryant, K. Johnsen
  • 2005
1 Excerpt

Fundamentals of Power Electronics

  • R. W. Erickson, D. Maksimovic
  • Second Edition, Kluwer Academic Publishers,
  • 2001
1 Excerpt

Similar Papers

Loading similar papers…