The next generation motor control method, DTC direct torque control

@article{Tiitinen1996TheNG,
  title={The next generation motor control method, DTC direct torque control},
  author={Pekka Tiitinen and M. Surandra},
  journal={Proceedings of International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth},
  year={1996},
  volume={1},
  pages={37-43 vol.1}
}
  • P. Tiitinen, M. Surandra
  • Published 8 January 1996
  • Engineering
  • Proceedings of International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth
Direct torque control (DTC) is the latest AC motor control method developed by ABB. ACS600 is the first application utilising DTC. DTC is a control method that embeds a motor and inverter together and controls them together in an optimal manner. In DTC, all switch changes are based directly on the electromagnetic state of the motor. Optimum switching is determined for every control cycle on a time level of 25 microseconds. The switch positions of the power module are determined by the… 

Figures from this paper

A New Direct Torque Control Method of Induction Motor for Torque Ripple Reduction

TLDR
A new Direct Torque Control[DTC] method of induction motor is presented and the PWM technique is applied to proposed control method and torque and speed ripple could be reduced in comparison with the conventional switching table DTC.

Three-level inverters with direct torque control

  • V. Perelmuter
  • Engineering
    Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129)
  • 2000
TLDR
The peculiarity of the three-level VSI with DTC and the advantages that can be received are investigated and algorithms for drive control under high and low frequencies and for middle point voltage control are developed.

FOC and DTC: two viable schemes for induction motors torque control

Field-oriented control and direct torque control are becoming the industrial standards for induction motors torque control. This paper is aimed at giving a contribution for a detailed comparison

Direct Torque Control of Induction Motor with Improved Switching Scheme

This paper focuses on performance improvements of the rotor flux estimation for a direct torque controlled induction motor drive and this is another method to that of to the field oriented control

Direct torque control of permanent magnet synchronous motor using space vector modulation

TLDR
A modified DTC based on flux error vector algorithm (FEVA-DTC) is proposed to reduce torque and flux ripples in this study.

Role of Direct Torque Control Induction Motor Drives in MEMS

Direct torque control of three phase induction motor (IM) is an outstanding method and also the state-of-art based on instantaneous space vector theory. It is highly commercialized which reflects

Modeling and Simulation of Direct Torque Control of Induction Motor Drive

The main focus of this paper is towards the analysis of Direct Torque Control (DTC) scheme with Space Vector Modulation (SVM) technique. Dynamic performance of the induction motor is improved by the

DTC-based strategies for induction motor drives

  • G. BujaD. CasadeiG. Serra
  • Engineering
    Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)
  • 1997
TLDR
An improved stator flux estimator is presented which allows the system under to be kept under control even at standstill and the sensitivity of the control system to parameter variations is presented.

Direct torque control of induction motor drives

  • G. BujaD. CasadeiG. Serra
  • Engineering
    ISIE '97 Proceeding of the IEEE International Symposium on Industrial Electronics
  • 1997
Direct torque control (DTC) is an emerging technique for controlling PWM inverter-fed induction motor (IM) drives. It allows the precise and quick control of the IM flux and torque without calling

Redundant Drive with Direct Torque Control (DTC) and dual-star synchronous machine, simulations and verification

The performance of a drive and the quality of torque control in DTC depend on the accuracy of the estimation of flux linkage. For applications with dual-star machine each stator winding is supplied
...

References

SHOWING 1-3 OF 3 REFERENCES

Dim& Selbsf-regelung (DSR) far hochdynamischc D*ehfildantrie& mif stromrider-speisung

  • EtzArdriv BD
  • 1985

Prinzip der Feld-otienfiencng, die Gnrndlage far die Tranmctor-Regelung wn D d -Jiddmaschinen

  • Siemens-Z

The Next Generation COntTol Method Direct Torque contwl

  • EPE Chapter Symposium
  • 1994