The influence of various common assumptions on the boundary-condition-independence of compact thermal models

@article{Lasance2004TheIO,
  title={The influence of various common assumptions on the boundary-condition-independence of compact thermal models},
  author={C. Lasance},
  journal={IEEE Transactions on Components and Packaging Technologies},
  year={2004},
  volume={27},
  pages={523-529}
}
  • C. Lasance
  • Published 2004 in
    IEEE Transactions on Components and Packaging…
It has been repeatedly shown that high accuracy can be obtained when comparing boundary-condition-independent compact thermal models (CTMs) to detailed model results. However, it should be realized that these results have been generated using certain assumptions (e.g., uniformly distributed boundary conditions), and the question remains about the validity of these assumptions when CTMs are used in "real-life" environments. The results show that the assumptions are justified, at least for the… CONTINUE READING

Citations

Publications citing this paper.
Showing 1-7 of 7 extracted citations

Thermal characterization of a multi-heat source component with and without an external heat sink

20th International Workshop on Thermal Investigations of ICs and Systems • 2014
View 1 Excerpt

Design and Optimization of S-Type Thermal Cutoffs

IEEE Transactions on Components and Packaging Technologies • 2008
View 1 Excerpt

Thermal Development, Modeling and Characterization of the Cell Processor Module

Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006. • 2006

Compact electro-thermal model of semiconductor device with nonlinear convection coefficient

EuroSimE 2005. Proceedings of the 6th International Conference on Thermal, Mechanial and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2005. • 2005
View 1 Excerpt

Parameterized physical compact thermal modeling

IEEE Transactions on Components and Packaging Technologies • 2005
View 2 Excerpts

References

Publications referenced by this paper.
Showing 1-10 of 10 references

Thermal compact models: an alternative approach

E. Bosch
IEEE Trans. Comp. Packag. Technol., vol. 26, pp. 173–178, June 2003. • 2003
View 4 Excerpts
Highly Influenced

Thermal compact models for electronic systems

Eighteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium. Proceedings 2002 (Cat.No.02CH37311) • 2002
View 4 Excerpts
Highly Influenced

Compact thermal models for electronic systems

N. Sabry
IEEE Trans. Comp. Packag. Technol., vol. 26, pp. 179–185, June 2003. • 2003

The accuracy of BCI compact thermal models for nonuniformly distributed boundary conditions

C. Lasance
Proc. 8th THERMINIC Workshop, 2002, pp. 251–259. • 2002
View 1 Excerpt

The conceivable accuracy of experimental and numerical thermal analyzes of electronic systems, appendix C

C. Lasance
IEEE Trans. Comp. Packag. Technol., vol. 25, pp. 366–382, Sept. 2002. • 2002
View 1 Excerpt

Two benchmarks to facilitate the study of compact thermal modeling phenomena

Vinke, C. Lasance
IEEE Trans. Comp. Packag. Technol., vol. 24, pp. 559–566, Dec. 2001. • 2001
View 2 Excerpts

CTMs of packages used in conduction-cooled applications

A. Aranyosi, A. Ortega, A. Griffin, S. West, D. Edwards
Proc. IEEE Trans. Comp. Packag. Technol., vol. 23, p. 470, Sept. 2000. • 2000
View 1 Excerpt

Creation and evaluation of compact models for thermal characterisation using dedicated optimisation software

Fifteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.99CH36306) • 1999
View 1 Excerpt

Compact models for accurate thermal characterization of electronic parts

H. Vinke, C. Lasance
IEEE Trans. Comp., Packag., Manufact. Technol. A, vol. 20, pp. 411–419, Dec. 1997. • 1997

A novel approach for the thermal characterization of electronic parts

C. Lasance, H. Vinke, H. Rosten, K.-L. Weiner
Proc. SEMITHERM XI, San Jose, CA, 1995, pp. 1–9. • 1995
View 1 Excerpt

Similar Papers

Loading similar papers…