• Corpus ID: 24597024

The influence of adhesive thickness on the microtensile bond strength of three adhesive systems.

  title={The influence of adhesive thickness on the microtensile bond strength of three adhesive systems.},
  author={Camillo D'Arcangelo and Lorenzo Vanini and Gianni Domenico Prosperi and Giulia Di Bussolo and Francesco de Angelis and Maurizio D’Amario and Sergio Caputi},
  journal={The journal of adhesive dentistry},
  volume={11 2},
PURPOSE To evaluate the effects of multiple adhesive layers of three etch-and-rinse adhesives on both adhesive thickness and microtensile bond strength (microTBS). MATERIALS AND METHODS Midcoronal occlusal dentin of 36 extracted human molars was used. Teeth were randomly assigned to 3 groups (EB, XP, PQ) according to the adhesive system to be used: PQ1 (Ultradent) (PQ), EnaBond (Micerium) (EB), or XP Bond (Dentsply/DeTrey) (XP). Specimens from each group were further divided into three… 
Microtensile Bond Strength of Etch-and-Rinse Adhesives in Different Hydroabrasion Conditionings
Hydabrasion can be used for dentin cavity preparation or finishing, since it does not seem to affect the bonding effectiveness, and the type of adhesive used had a significant effect on the tensile bond strength.
The effect of double-coating and times on the immediate and 6-month dentin bonding of universal adhesives.
Universal adhesives seemed more stable against water degradation than traditional two-step etch-and-rinse and all-in-one systems within the 6-month period.
In vitro evaluation of bonding effectiveness to dentin of all-in-one adhesives.
Multiple Adhesive Layering Influence on Dentin Bonding and Permeability.
The authors recommend the application of more than one layer of Adper Single Bond 2, because a single layer showed lower μTBS and higher permeability values, and groups with two and four layers of bond showed higherμTBS to dentin and they also showed lower adhesive permeability than ONE layer.
Effect of multiple coatings of one-step self-etching adhesive on microtensile bond strength to primary dentin.
Multi-Layer Application of Self-Etch and Universal Adhesives and the Effect on Dentin Bond Strength
The present study showed that using triple adhesive layers with simplified adhesive systems can be recommended to improve their performance, due to differences in the composition of self-etch and universal adhesives, the exact application protocol is product dependent.
Dentin Bonding Performance and Nanoleakage Properties of Universal Adhesives in Different Etching Modes
Comparisons of microtensile bond strengths (μTBS) and nanoleakage (NL) of four universal adhesives applied in two different etching modes, self-etch (se) or etch-and-rinse (er) show that UA performance was material-dependent.
Evaluation of Tensile Bond Strength and Hybrid Layer of Newer Generation Adhesive with Single and Multiple Consecutive Applications– An In–vitro Study
TBS with two consecutive applications of all in one adhesive was significantly higher than with a single application, but application of further coatings caused a decrease in bond strength; there is no significant relationship between increase in number of adhesive layers and thickness of hybrid layer.
Bond strength of five dental adhesives using a fracture mechanics approach.
  • J. Jančář
  • Materials Science, Medicine
    Journal of the mechanical behavior of biomedical materials
  • 2011
Evaluation of Bond Strength (μTBS) of Conventional Adhesives in Substrate Deproteinized-A Study In Vitro
The adhesive system All Bond 3 (Bisco) established higher values of bond strength after performing deproteinization, which changed ultra-morphology and chemical composition of the dentin substrate.


Influence of additional adhesive application on the microtensile bond strength of adhesive systems.
The results indicated that G3 presented the highest microTBS and the thickest adhesive layer, while G6 and G7 presented the lowestMicroTBS values were not affected by the thicker layer when solvent-free adhesives systems were used.
Relationship between adhesive thickness and microtensile bond strength.
This study evaluated the effect of the thickness of the adhesive resin layer of two commercially available resin bonding systems on bond strengths (Single Bond and Liner Bond 2V). The adhesive of
The effect of double adhesive application on the shear bond strength to dentin of compomers using three one-bottle adhesive systems.
The development of one-bottle dentin adhesive systems resulted in much optimism about providing simplified predictable esthetic dentistry. However, laboratory testing of these systems continues to
Shear bond strengths of one-bottle dentin adhesives using multiple applications.
Multiple applications of adhesive decreased the bond strength of each system, but the difference was significant only for four applications of One-Step, and the effect of surface moisture and dual-cure composite on bond strengths of one-Step and Tenure Quik respectively.
In vitro interfacial relationship between human dentin and one-bottle dental adhesives.
The Effects of Adhesive Thickness on Polymerization Contraction Stress of Composite
The contraction stress generated during the placement of a composite restoration contributes significantly to early marginal leakage, and this stress was significantly absorbed and relieved by the application of an increasing thickness of low-stiffness adhesive.
Dentin bond durability after three years using a dentin bonding agent with and without priming.
  • M. Burrow, M. Satoh, J. Tagami
  • Medicine, Materials Science
    Dental materials : official publication of the Academy of Dental Materials
  • 1996
How wet should dentin be? Comparison of methods to remove excess water during moist bonding.
The shear bond strength of two adhesive systems when applied on dentin surfaces with different degrees of wetness was evaluated and the adhesion values were affected both by the degree of dentin wetness and by the adhesive systems.
Effect of solvent type on microtensile bond strength of a total-etch one-bottle adhesive system to moist or dry dentin.
The microtensile bond strength (MTBS) test was performed with a Bencor device in an Instron machine at a crosshead speed of 0.5 mm/minute and the highest MTBS were achieved with the use of an ethanol-based adhesive to moist dentin.