The influence of 3d-metal alloy additions on the elastic and thermodynamic properties of CuPd3

@article{Shuo2013TheIO,
  title={The influence of 3d-metal alloy additions on the elastic and thermodynamic properties of CuPd3},
  author={Huang Shuo and Zhang Chuan-hui and Sun Jing and Shen Jiang},
  journal={Chinese Physics B},
  year={2013},
  volume={22},
  pages={083401}
}
Embedded-atom method (EAM) potentials are used to investigate the effects of alloying (e.g. 3d-metals) on the trends of elastic and thermodynamic properties for CuPd3 alloy. Our calculated lattice parameter, cohesive energy, and elastic constants of CuPd3 are consistent with the available experimental and theoretical data. The results of elastic constants indicate that all these alloys are mechanically stable. Further mechanical behavior analysis shows that the additions of Cr, Fe, Co, and Ni… Expand
1 Citations
Second nearest-neighbor modified embedded-atom method interatomic potentials for the Pt-M (M = Al, Co, Cu, Mo, Ni, Ti, V) binary systems
Abstract Interatomic potentials for Pt-M (M = Al, Co, Cu, Mo, Ni, Ti, V) binary systems have been developed on the basis of the second nearest-neighbor modified embedded-atom method (2NN MEAM)Expand

References

SHOWING 1-10 OF 40 REFERENCES
Chen's lattice inversion embedded-atom method for Ni-Al alloy
The structural properties, the enthalpies of formation, and the mechanical properties of some Ni–Al intermetallic compounds (NiAl, Ni3Al, NiAl3, Ni5Al3, Ni3Al4) are studied by using Chen’s latticeExpand
Alloying effects on elastic properties of TiN-based nitrides
The effects of alloying (Cr, Zr, Nb, V, W, Mo and Al) on the trend of elastic properties of TiN-based nitrides have been investigated using ab initio density functional theory calculations within theExpand
X-ray diffraction study on the thermal properties of CuMPt6 (M = 3d elements) alloys
Abstract The effect of ternary addition of the 3d elements Ti, V, Cr, Mn, Fe, Co and Ni to CuPt 3 to form ternary CuMPt 6 alloys on the thermal properties was investigated using high-temperatureExpand
The structure and physical properties of CuMPd6 (M = Ti, V, Mn and Fe) ternary alloys
Abstract In situ X-ray diffraction and magnetic susceptibility measurements were performed to determine the structure, thermal and magnetic properties of the ternary alloys CuMPd 6 (M = Ti, V, Mn andExpand
Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys.
  • Foiles, Baskes, Daw
  • Materials Science, Medicine
  • Physical review. B, Condensed matter
  • 1986
TLDR
A consistent set of embedding functions and pair interactions for use with the embedded-atom method have been determined empirically to describe the fcc metals Cu, Ag, Au, Ni, Pd, and Pt as well as alloys containing these metals. Expand
Elastic properties of mono- and polycrystalline hexagonal AlB2-like diborides of s, p and d metals from first-principles calculations
We have performed accurate ab initio total energy calculations using the full-potential linearized augmented plane-wave (FP-LAPW) method with the generalized gradient approximation (GGA) for theExpand
Vibrational properties of alpha- and sigma-phase Fe-Cr alloy.
TLDR
Characteristic features of PDOS, which distinguish one phase from the other, were revealed and successfully reproduced by the theory and an excellent agreement for some quantities derived from experiment and first-principles theory, like C(V) and quite good ones for others like D and S were obtained. Expand
Electronic mechanism of hardness enhancement in transition-metal carbonitrides
Transition-metal carbides and nitrides are hard materials widely used for cutting tools and wear-resistant coatings. Their hardness is not yet understood at a fundamental level. A clue may lie in theExpand
Phase stability, bonding mechanism, and elastic constants of Mo5Si3 by first-principles calculation
We present results of first-principles local-density-functional calculations of the structural and elastic properties of Mo5Si3. Among the three different structures (D8m, D88, and D8l), the D8mExpand
Alloy models with the embedded-atom method.
  • Johnson
  • Materials Science, Medicine
  • Physical review. B, Condensed matter
  • 1989
TLDR
A simple analytic nearest-neighbor embedded-atom-method model developed form onatomic fcc metals has been extended to study alloying, which yields alloy models with the same invariance to electron density transformations asmonatomic models. Expand
...
1
2
3
4
...