The erosion transition of tungsten-alloy long rods into aluminum targets

@article{Segletes2007TheET,
  title={The erosion transition of tungsten-alloy long rods into aluminum targets},
  author={Steven B. Segletes},
  journal={International Journal of Solids and Structures},
  year={2007},
  volume={44},
  pages={2168-2191}
}
  • S. Segletes
  • Published 1 April 2007
  • Materials Science
  • International Journal of Solids and Structures
View via Publisher
doi.org
9 Citations
Background Citations
2
Methods Citations
2

9 Citations

Citation Type

Citation Type

Dimensional Analysis and Extended Hydrodynamic Theory Applied to Long-Rod Penetration of Ceramics
Long-rod penetration:the transition zone between rigid and hydrodynamic penetration modes
Experimental investigations on the ballistic impact performances of cold rolled sheet metals
Rigid and Erosive Projectiles Impact on Metallic Targets
In this chapter, the performance of the metallic targets against rigid, deformable, and erosive projectile impact is concerned. Firstly, a perforation model for rigid projectile is introduced and…
Evolution of penetration mechanism induced by strain rate effect
According to the dynamic mechanical properties, in the striking velocity range, the strain rate of the projectile and target caused by penetration can reach 104 ~106 /s. The strain rate effect…
On the deep penetration of deforming long rods
Theoretical Research Progress in High-Velocity/Hypervelocity Impact on Semi-Infinite Targets
With the hypervelocity kinetic weapon and hypersonic cruise missiles research projects being carried out, the damage mechanism for high-velocity/hypervelocity projectile impact on semi-infinite…
The effects of compressibility and strength on penetration of long rod and jet
Analytical models for penetration mechanics: A Review

References

SHOWING 1-10 OF 28 REFERENCES
Analysis of the Noneroding Penetration of Tungsten Alloy Long Rods Into Aluminum Targets
Abstract : Data concerning the rigid/eroding-rod threshold transition are reported for hemispherical-nosed tungsten rods penetrating into thick 5083-aluminum targets. Presented data quantitatively…
Terminal Ballistics Test and Analysis Guidelines for the Penetration Mechanics Branch
Abstract : The principal mission of the Penetration Mechanics Branch (PMB) of the Terminal Ballistics Division (TBD) of the Ballistic Research Laboratory (BRL). Aberdeen Proving Ground, MD, is…
Modeling Threshold Velocity of Hemispherical and Ogival-Nose Tungsten-Alloy Penetrators Perforating Finite Aluminum Targets
Abstract : This study examines the ability of the CTH hydrocode to predict the effect of rod nose shape on the transition from rigid body to eroding rod penetration for tungsten alloy long rod…
Modeling the Effect of Penetrator Nose Shape on Threshold Velocity for Thick Aluminum Targets.
Abstract : This study examines the ability of the CTH hydrocode to predict the effects of rod nose shape on the threshold impact velocity, whereby tungsten alloy long rods transition from rigid-body…
Penetration of 6061-T651 Aluminum Targets With Rigid Long Rods
We developed engineering models for forces on rigid, long rods with spherical, ogival, and conical noses that penetrated rate independent, elastic-perfectly plastic targets. The spherical and…
High-velocity projectile penetration into thick armour targets
Penetration of 6061-T6511 aluminum targets by ogive-nose steel projectiles with striking velocities between 0.5 and 3.0 km/s
Penetration Experiments with 6061-T6511 Aluminum Targets and Spherical-Nose Steel Projectiles at Striking Velocities Between 0.5 and 3.0 km/s
Simulations of the penetration of limestone targets by ogive-nose 4340 steel projectiles
Perforation of aluminum armor plates with conical-nose projectiles
...
1
2
3
...