The effects of sintering temperature and titanium ratio on structural and electrical properties of new PZT-CNS ceramics

@inproceedings{Meklid2018TheEO,
  title={The effects of sintering temperature and titanium ratio on structural and electrical properties of new PZT-CNS ceramics},
  author={Abdelhek Meklid and Ahmed Boutarfaia},
  year={2018}
}
In this contribution, (0.80-x)Pb(Cr1/5,Ni1/5,Sb3/5)O3-xPbTiO3-0.20PbZrO3 perovskite ceramics namely PZT-CNS were prepared by solid state reaction method. The obtained samples have been characterized by different techniques including XRD, density test, SEM analysis, and Dielectric measurements in order to investigate the effects of sintering temperature and titanium content on microstructure and dielectric properties. The obtained experimental results have been reported and well discussed. 

Figures and Tables from this paper

Phase structure, microstructure and electrical properties of PCNS–PZ–PT ternary ceramics near the morphotropic phase boundary
In the present study, (0.54 − x)Pb(Cr1/5,Ni1/5,Sb3/5)O3-0.46PbZrO3-xPbTiO3 ceramic powders were synthesized by the conventional solid-state reaction process (where x = 0.42, 0.44, 0.46, 0.48 andExpand
Structure, electric and dielectric properties of PbFe1/3Ti1/3W1/3O3 single perovskite compound
A conventional solid-state method was used to prepare Pb(Fe1/3Ti1/3W1/3)O3 single perovskite material. The sample sintered at 900°C was studied by XRD and after Rietveld refinement theExpand
Modeling and Simulation of Geo-Thermal Electricity to Probe the Volcano-Seismic Prediction
Received: 1 January 2019 Accepted: 4 May 2019 Model of the earth was constructed and magma chamber was created in outer coremantel region. A spherical magnet is put in the centre. Sealing sticks wasExpand

References

SHOWING 1-10 OF 17 REFERENCES
Effects of Sintering Temperature on the Dielectric and Piezoelectric Properties of Nb-Doped PZT Ceramics and Their Applications
The PZT-based ceramics with a composition of Pb1 − 0.5x (Zr0.52Ti0.48)1 − x Nb x O3; x = 0.04–0.06 were prepared by conventional mixed-oxide method, with sintering temperature at 1200°–1300° for 2Expand
Effect of Sm on structural, dielectric and conductivity properties of PZT ceramics
Abstract Solid solutions of Pb1−xSmx (Zr0.55Ti0.45)1−x/4O3 (PSZT) (x = 0.00, 0.03, 0.06 and 0.09) were synthesized by mixed oxide method at high temperature. The formations of single-phase compoundsExpand
The properties low-temperature fixed piezoelectric ceramics
Chemicals having relatively Iow melting points have been used to reduce the required sintering temperature of MnO2-doped Pb0.9875((Zr0.52Ti0.48)0.975Nb0.025. Among these compounds Li2CO3, Na2CO3,Expand
Investigation on the Microstructure and Electrical Properties of the Compositionally Modified PZT Ceramics Prepared by Mixed-Oxide Method
The structural and electrical properties of Pb[ZrxTi0.95-x(Mo1/3In2/3)0.05]O3 piezoelectric ceramics system with the composition near the morphotropic phase boundary were investigated as a functionExpand
Effect of strontium substitution on dielectric constants of PZT nanocrystalline ceramics
The influence of soft isovalent doping at Pb2+ site of PZT had been extensively investigated for various specific properties required in either thin films or bulk ceramics. In this report, we haveExpand
Dielectric and Piezoelectric Properties of Sr Doped 0.8PZT-0.2PNN Ceramics
The solid solution of 0.8(Pb(Zr 1/2 Ti 1/2 )O 3 ) – 0.2(Pb(Ni 1/2 Nb 2/3 )O 3 ) doped with Sr were prepared by solid state route. Effect of Sr dopant on dielectric and piezoelectric properties wasExpand
Effect of Al doping on structural and dielectric properties of PLZT ceramics
Polycrystalline samples of Al modified lead lanthanum zirconate titanate [PLZT] with Zr = 55% and Ti = 45%, have been synthesized by a high-temperature solid-state reaction technique. X-rayExpand
Dielectric and piezoelectric properties of Cu2+-doped alkali Niobates
Abstract The effect of Cu 2+ addition (0.5–2 mol%) on microstructure and electromechanical properties of lead-free piezoelectric system of (K 0.44 Na 0.52 Li 0.04 )(Ta 0.1 Sb 0.06 Nb 0.84 )O 3Expand
Reaction Mechanisms in the Formation of PZT Solid Solutions
The solid-state reactions occurring in the system PbO-TiO2-ZrO2 were investigated using constant heating rates up to 1000°C. DTA, dilatometric length changes, and XRD analysis were used forExpand
Frequency and voltage dependent profile of dielectric properties, electric modulus and ac electrical conductivity in the PrBaCoO nanofiber capacitors
Abstract In this study, praseodymium barium cobalt oxide nanofiber interfacial layer was sandwiched between Au and n-Si. Frequency and voltage dependence of e′, e′, tanδ, electric modulus (M′ and M″)Expand
...
1
2
...