The behaviour of mixtures of hydrogen peroxide and water. Part 1.—Determination of the densities of mixtures of hydrogen peroxide and water

@article{Easton1952TheBO,
  title={The behaviour of mixtures of hydrogen peroxide and water. Part 1.—Determination of the densities of mixtures of hydrogen peroxide and water},
  author={M. F. Easton and Anthony G. Mitchell and W. F. Kenrick Wynne-Jones},
  journal={Transactions of The Faraday Society},
  year={1952},
  volume={48},
  pages={796-801}
}
The densities of mixtures of hydrogen peroxide and water have been determined at 0", lo", 25", 50" and 96" C by a simple displacement method. The method is found convenient and accurate for determining the concentrations of mixtures of hydrogen peroxide and water. The data have been fitted to equations and the agreement of the data and equations is about 1 part in 5000 for all temperatures except 96" C where it is about 1 part in 1400. 

Figures and Tables from this paper

On the analyses of mixture vapor pressure data: the hydrogen peroxide/water system and its excess thermodynamic functions.
TLDR
New critical constants and vapor pressure-temperature equations needed in the analysis approach described above have been derived and temperature functions for the four Redlich-Kister parameters were derived that allowed calculations of the excess Gibbs energy, excess entropy, and excess enthalpy whose values at various temperatures indicate the complexity of H2O2-H2O mixtures not evident in the original analyses of this suite of experimental results.
Preferential solvation in mixed solvents. Part 5.—Binary mixtures of water and organic solvents
Values of the Kirkwood–Buff integrals have been obtained from suitable thermodynamic data for 12 binary mixtures of water and organic solvents over the entire composition range where appropriate. The
A comprehensive thermodynamic investigation of water-ethylene glycol mixtures at 5, 25, and 45°C
A detailed thermodynamic study of water (W)-ethylene glycol (EG) mixtures has been carried out as function of temperature (5, 25 and 45°C) and over the entire composition range. The data comprise
Absolute integrated intensities of vapor-phase hydrogen peroxide (H2O2) in the mid-infrared at atmospheric pressure
TLDR
Qualitative infrared spectra of vapor-phase hydrogen peroxide (H2O2) with all spectra pressure-broadened to atmospheric pressure are reported and the ν6 band strength compares favorably with Klee et al. (1999), as well as with the HITRAN values.
Relation between surface structural and chemical properties of platinum nanoparticles and their catalytic activity in the decomposition of hydrogen peroxide
The disproportionation of H2O2 to H2O and molecular O2 catalyzed by platinum nanocatalysts is technologically very important in several energy conversion technologies, such as steam propellant thrust
Novel methods for the removal of chlorine dioxide gas from aqueous solution and sodium chlorite production
Chlorine dioxide (ClO2) is a key chemical synthesised on-site to combat bacterial contamination in water. Current technology uses two or more liquid solutions brought together in a reactor followed
Effect of Fuel Type on Hypergolic Ignition of Hydrogen Peroxide with Gelled Hydrocarbon Fuel
Experimental counterflow and impinging jet studies and modeling analysis of hypergolic hydrogen peroxide and gelled hydrocarbon fuel mixtures were conducted to characterize condensed phase reaction
Growth and Detachment of Oxygen Bubbles Induced by Gold-Catalyzed Decomposition of Hydrogen Peroxide
TLDR
The current results show that the dynamical evolution of bubbles is influenced by comprehensive effects combining chemical catalysis and physical mass transfer, and the size of the bubbles at the moment of detachment is determined by the balance between buoyancy and surface tension and by the detailed geometry at the bubble’s contact line.
Carbon-based materials for photo- and electrocatalytic synthesis of hydrogen peroxide.
TLDR
This work reviews the current status and future perspectives in this field focused on carbon-based catalysts and their hybrids, since they are relatively inexpensive, bio-friendly and flexible for structural modulation, and presents state-of-the-art progress and typical strategies for catalyst engineering towards selective and active H2O2 production.
...
...