The X-ray activated reduction of silver (I) solutions as a method for nanoparticles manufacturing
@article{Staszewski2008TheXA,
title={The X-ray activated reduction of silver (I) solutions as a method for nanoparticles manufacturing},
author={Marek Staszewski and Dorota Kopyto and Karsten Becker and A. Wrona and Jerzy Dworak and M. Kwarciński},
journal={Journal of achievements in materials and manufacturing engineering},
year={2008},
volume={28},
pages={23-26}
}Purpose: The aim of this work was to determine an effect of X-ray irradiation on activation of silver reduction from water solutions of its salts, resulting in fabrication of nanocrystalline product. Design/methodology/approach: The process and products of the reduction of silver nitrate water solut-ions, containing the additions of other compounds or not, including particle growth inhibitors, irradiated with X-rays of different energy or with a laser beam, were investigated. Findings: It was…
No Paper Link Available
3 Citations
Hydrogen storage alloys prepared by high-energy milling
- Materials Science
- 2011
Purpose: The aim of this work was to investigate an efficiency of high-energy milling, as a method to obtain hydrogen storage alloys with good properties. Design/methodology/approach: Two classes of…
AgSnBi powder consolidated by composite mode of deformation
- Materials Science
- 2010
AbstrAct Purpose: The objective of this work present the characterization of microstructure and properties of consolidated powder AgSn7.5Bi0.5 by using composition of cyclic extrusion compression…
Gamma irradiation of cotton fabrics in AgNO₃ solution for preparation of antibacterial fabrics.
- MedicineCarbohydrate polymers
- 2014
References
SHOWING 1-10 OF 21 REFERENCES
Preparation of gold, platinum, palladium and silver nanoparticles by the reduction of their salts with a weak reductant–potassium bitartrate
- Chemistry, Materials Science
- 2003
Gold and platinum nanoparticles were synthesized by the reduction of their salts with potassium bitartrate as the reductant and poly(N-vinyl-2-pyrrolidone)
(PVP), polyethylene glycol (PEG)
(for Pt…
Application of laser in multicrystalline silicon surface processing
- Materials Science
- 2007
Purpose: Surface texturisation is a common technological process in solar cell manufacturing aiming at a reduction of the light reflection losses. The standard alkaline texturing of multicrystalline…
Synthesis of contamination-free silver nanoparticle suspensions for micro-interconnects
- Chemistry
- 2007
Chemical Analysis by X-Ray Diffraction: Classification and Use of X-Ray Diffraction Patterns
- Materials SciencePowder Diffraction
- 1986
Editor's Note: As part of our plan to reprint previously published papers of great historical interest, the editorial board is pleased to reproduce the following paper by Hanawalt, Frevel and Rinn.…
Residual stresses in the strips from copper-based alloys
- Materials Science
- 2007
Purpose: The aim of this work was to define the stress state in the strips from copper-based alloys with an account of the parameters of rolling and flattening. Design/methodology/approach: Samples…
Methods for the calculation of surface free energy of solids
- Materials Science
- 2007
Purpose: The main purpose of this paper is the analysis of the most common methods for the calculation of the surface free energy (SFE) of solids, utilising the results of the contact angle…
Investigation on Production Mechanism of Ultrafine Particles in ERC (Evaporation and Rapid Condensation) Method
- Engineering
- 1993
For the purpose of the production of a large amount of isolated ultrafine particles (UFP), a new process had been developed by means of a rapid vapor condensation technique named ERC method. In this…

