The Methods and Experiments of Shape Measurement for Off-Axis Conic Aspheric Surface

@article{Li2020TheMA,
  title={The Methods and Experiments of Shape Measurement for Off-Axis Conic Aspheric Surface},
  author={Shijie Li and Jin Zhang and Weiguo Liu and Hai-feng Liang and Y. F. Xie and Xiaoqin Li},
  journal={Materials},
  year={2020},
  volume={13}
}
The off-axis conic aspheric surface is widely used as a component in modern optical systems. It is critical for this kind of surface to obtain the real accuracy of the shape during optical processing. As is widely known, the null test is an effective method to measure the shape accuracy with high precision. Therefore, three shape measurement methods of null test including auto-collimation, single computer-generated hologram (CGH), and hybrid compensation are presented in detail in this research… Expand

Figures, Tables, and Topics from this paper

Study on Aided Optical Alignment by Programmable Spots Array Generated by Off-Axis Parabolic Phase Based on LCoS-SLM
We present an aided optical alignment method using the liquid crystal on silicon spatial light modulator (LCoS-SLM). An optical system composed of an interferometer and an LCoS-SLM was established toExpand
Surface and Interface Engineering for Organic Device Applications
In last few decades, organic materials (or carbon-based materials in a broad sense) including polymers have received much attention for their potential applications in electronics, because they haveExpand

References

SHOWING 1-10 OF 25 REFERENCES
Measurement investigation of an off-axis aspheric surface via a hybrid compensation method.
TLDR
Experiments show that the results obtained by the two methods are consistent, which indicates that this kind of hybrid compensation is an effective and accurate method for measurement of off-axis aspheric surfaces. Expand
Test of off-axis aspheric surfaces with CGH
A new test method based on a Computer-generate Hologram(CGH) was presented for precisely testing off-axis aspheric surfaces and aligning the optics in tests.In this method,off-axis aspheric surfacesExpand
Test of an off-axis asphere by subaperture stitching interferometry
A new method combined subaperture stitching with interferometry(SSI) is introduced. It can test large and off-axis aspheric surfaces without the aid of other null optics. In this paper the basicExpand
A practical method for determining the accuracy of computer-generated holograms for off-axis aspheric surfaces
Abstract To design a computer-generated hologram (CGH) to measure off-axis aspheric surfaces with high precision, two different design methods are introduced: ray tracing and simulation using theExpand
Measurement for off-axis aspheric mirror using off-axis annular subaperture stitching interferometry: theory and applications
Abstract. An off-axis annular subaperture stitching interferometry (OASSI) is presented to test off-axis aspheric surfaces. In view of this, the relationship between misalignment and wavefrontExpand
Experimental study of an off-axis three mirror anastigmatic system with wavefront coding technology.
TLDR
The alignment, the imaging experiment, and the image restoration of the off-axis TMA system with WFC technology are described and it is concluded that the experiment results agree with the earlier theoretical analysis. Expand
CGH null test design and fabrication for off-axis aspherical mirror tests
A null-lens based on a Computer Generated Hologram (CGH) is designed to test the primary off-axis aspherical mirror of the GAIA space telescope. This custom-designed and fabricated CGH includes fiveExpand
Design and analysis for interferometric measurements of the GMT primary mirror segments
The Giant Magellan Telescope (GMT) uses seven 8.4-m diameter segments to create a giant primary mirror, 25 meters across with focal ratio f /0.7. The off-axis segments will be difficult to measureExpand
Design and Fabrication of Twin Computer-generated Holograms for Testing Concave Aspherical Surfaces
Based on the principle of testing aspherical surfaces with Computer-generated Holograms (CGH), a binary phase twin CGH is proposed and designed. It consists of two segments, namely main CGH andExpand
Non-null testing for aspheric surfaces using elliptical sub-aperture stitching technique.
TLDR
An elliptical sub-aperture stitching (ESAS) method to measure the aspheric surfaces using the non-null configuration to overcome the disadvantages of the null testing, and a stitching algorithm is developed to stitch all the phase data together. Expand
...
1
2
3
...